Address
Form of workJob Description
Become a part of something meaningful! Ground Missile Defense (GMD) is the heart of the Missile Defense System and a key element of our nation's defense against ballistic missile attacks.
The GMD Weapon System processes data from multiple sensors to identify and characterize the inbound ballistic missile threat, plans the best defensive solution, and launches the intercepting missiles to negate the threat.
Basic Qualifications
- Resolves and corrects complex problems during operations, maintenance, and overhaul of (GMD) Ground-based Defense system/sub-system components.
- Works on small team for assembly, disassembly and troubleshooting of operational components to include a variety of electrical and mechanical components using general maintenance practices and product specifications to correct failures.
- Performs routine and complex functional/diagnostic tests and troubleshoots electrical/mechanical systems, using monitoring instruments and bench/automated test equipment, to determine root cause of initial or isolated failures.
- Visually inspects component before installation or usage to verify cleanliness and serviceability of components.
- Visually inspect printed circuit boards for cold solder joints, cracked ICs, CAPs and other potentially bad components.
- Performs certified soldering of components and surface mount components in accordance with current specifications.
- Proficient in the use of a wide range of test equipment to include multimeters, oscilloscopes, spectrum analyzers, signal generators, and power meters.
- Identifies and communicates potential issues concerning Safety, HazMat, OSHA, and Environmental Protection Agency (EPA).
- Prepares and submits any required maintenance reports and attends all maintenance related meetings.
- Must have ability to lift a minimum of 25 pounds.
Manual dexterity to handle all types of hand tools (wrenches, pliers, crimp, screwdriver, etc.)
o Ensure test systems are setup per Acceptance Test Procedures (ATPs) and Qualification Test Procedures (QTPs).
- This position requires an active Secret Clearance.
Desired skills
- Previous experience working on the Ground Based Mid-Course Defense (GMD) system.
- Has worked with any of the following: IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, J-STD-001, and/or ANSI/ESD S20.20.
- Experience working with spacecraft, aircraft, rocket ordnance/rocket motors, and missile components all a plus.
- Experience with assembling, repairing, and testing mechanical and electrical components and systems.
- Ability to operate a Forklift, truck mounted crane, and other MHE associated equipment.
- Experience in isolating and correcting malfunctions using automatic and semi-automatic program maintenance diagnostics, unit self-tests, and Built-In Test Equipment (BITE) as well as industry standard commercial off the shelf external test equipment.
- The Maintenance Technician shall have a minimum of two years of depot forward maintenance experience
- Graduate of a commercial or military maintenance school or program
- Associate Certified Electronic Technician (CETs) certification.
- IPC - 610/620 Certification
EEO
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
*
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Other Important Information
By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Work Schedule Information
Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Colorado Pay Statement
Pay Rate:
The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, or Washington is $32,900 - $63,100 . Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
(Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.
Premium Pay Statement
Pay Rate:
The annual base salary range for this position in most major metropolitan areas in California and New York is $37,900 - $68,600. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
Become a part of something meaningful! Ground Missile Defense (GMD) is the heart of the Missile Defense System and a key element of our nation's defense against ballistic missile attacks.
The GMD Weapon System processes data from multiple sensors to identify and characterize the inbound ballistic missile threat, plans the best defensive solution, and launches the intercepting missiles to negate the threat.
Basic Qualifications
- Resolves and corrects complex problems during operations, maintenance, and overhaul of (GMD) Ground-based Defense system/sub-system components.
- Works on small team for assembly, disassembly and troubleshooting of operational components to include a variety of electrical and mechanical components using general maintenance practices and product specifications to correct failures.
- Performs routine and complex functional/diagnostic tests and troubleshoots electrical/mechanical systems, using monitoring instruments and bench/automated test equipment, to determine root cause of initial or isolated failures.
- Visually inspects component before installation or usage to verify cleanliness and serviceability of components.
- Visually inspect printed circuit boards for cold solder joints, cracked ICs, CAPs and other potentially bad components.
- Performs certified soldering of components and surface mount components in accordance with current specifications.
- Proficient in the use of a wide range of test equipment to include multimeters, oscilloscopes, spectrum analyzers, signal generators, and power meters.
- Identifies and communicates potential issues concerning Safety, HazMat, OSHA, and Environmental Protection Agency (EPA).
- Prepares and submits any required maintenance reports and attends all maintenance related meetings.
- Must have ability to lift a minimum of 25 pounds.
Manual dexterity to handle all types of hand tools (wrenches, pliers, crimp, screwdriver, etc.)
o Ensure test systems are setup per Acceptance Test Procedures (ATPs) and Qualification Test Procedures (QTPs).
- This position requires an active Secret Clearance.
Desired skills
- Previous experience working on the Ground Based Mid-Course Defense (GMD) system.
- Has worked with any of the following: IPC/WHMA-A-620, MIL-DTL-22520, NASA-STD-8739, J-STD-001, and/or ANSI/ESD S20.20.
- Experience working with spacecraft, aircraft, rocket ordnance/rocket motors, and missile components all a plus.
- Experience with assembling, repairing, and testing mechanical and electrical components and systems.
- Ability to operate a Forklift, truck mounted crane, and other MHE associated equipment.
- Experience in isolating and correcting malfunctions using automatic and semi-automatic program maintenance diagnostics, unit self-tests, and Built-In Test Equipment (BITE) as well as industry standard commercial off the shelf external test equipment.
- The Maintenance Technician shall have a minimum of two years of depot forward maintenance experience
- Graduate of a commercial or military maintenance school or program
- Associate Certified Electronic Technician (CETs) certification.
- IPC - 610/620 Certification
EEO
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
*
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Other Important Information
By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Work Schedule Information
Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Colorado Pay Statement
Pay Rate:
The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, or Washington is $32,900 - $63,100 . Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
(Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.
Premium Pay Statement
Pay Rate:
The annual base salary range for this position in most major metropolitan areas in California and New York is $37,900 - $68,600. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
