Address
Form of workJob Description
Work for a Connecticut based industrial technology company that provides high-efficiency electrical equipment to Industrial, Oil/Gas and Military industries.
CNC Machinist (set-up/operate):
Summary:
This position involves the use of CNC (Computer Numeric Control) machine shop equipment. Primarily Vertical Turret Lathe with Fanuc Controls and 5 axis Mori DMG with Siemens controls.
Essential Functions
Set up and operate, with knowledge of desirable speeds and feeds for various alloys. Ability to safely and effectively fixture and set up a variety of castings of various sizes and shapes. Knowledge of standard G codes, ability to use various measuring equipment to verify work performed along with the ability to offset and edit if needed to attain a quality part the first time every time. Ability to program is desirable. Majority of work is done on castings in a high mix low volume environment.
* Set up and operate CNC 5 Axis Milling
* Vertical and Horizontal Machining
* Experience with Mastercam preferred
* Experience with Solidworks a plus
Setup - Operation - Maintenance - Has attained very high level of proficiency and requires virtually no supervision. Can perform any operation that the machine is capable of doing and is capable of programming the machine, where applicable. Can set up any sequence of operations using any combination of tools with no outside help. Is extremely proficient at math required by job - is expert at using measuring instruments such as micrometers and other gauges. Performs routine cleaning and maintenance of machine including checking oil sight glasses. Performs periodic maintenance per the manufacturer's instructions. Can determine when it is necessary to have major maintenance performed to return the machine to normal operating condition.
Quality/Continuous Improvement/Productivity - Inspects own work - has very low rejection rate. Checks out program on first piece by positioning tool(s) for each operation, but not cutting until position is verified. Observes machine during entire automated machining operation - makes sure tools are sharp and performing correctly. Uses proven techniques to complete the required automated sequence of operations. Passes job on to next workstation in optimum time to maintain required quality and minimize rework
Problem Solving - Can work out virtually any problem that arises concerning work being performed - has usually seen some form of the problem before.
Blueprints & Traveler - Can not only correctly interpret the blueprints, but assists other Technicians and alerts Engineering to drawings that require correction. Can interpret all operations listed on Traveler documents that move with each job.
Environmental / Safety Issues
Normal exposure to coolant liquid, dust and fumes - limited exposure to hazardous materials. Keeps work area clean and free of scrap materials. Follows all safety rules applicable to machine as stated on posted signs and in Company policy.
Cross Training
Cross-trains on all of the machines listed in this position description as directed by the Machining Supervisor.
Training
Requirements for this position are to also be engaged in: 5S, Continuous Improvement, On-Time Delivery, Routine Total Preventative Maintenance and the submission of Improvement Ideas.
Education / Certification
High school graduate preferred - will consider commensurate experience. Has passed Certification Test established by the Company for each machine that is used without close supervision.
Requirements:
Generally has a minimum of 5 years" experience. Experience in Mastercam on horizontal CNC milling machine as well as VTL.
Program and setup 5 axis machine.
Working knowledge of other forms of CAD software, Vericut and Soildworks is a plus.
Understand GD&T, read and interpret blueprints.
Ability to hold tight tolerances.
Strong verbal communication.
Assist in helping operators to maintain production and quality.
Physical Requirements
Job requires standing most of the day. There is no repetitive motion. Since overhead cranes are available in all work areas, Technicians are not required to lift more than 50 pounds.
Input Material
Material comes from many sources, mainly nodular iron castings, aluminum castings, some steel, and some miscellaneous.
Finished Product
Ensures that finished product meets specifications and that it is moved to the next position on the Traveler in a timely manner.
CNC Machinist (set-up/operate):
Summary:
This position involves the use of CNC (Computer Numeric Control) machine shop equipment. Primarily Vertical Turret Lathe with Fanuc Controls and 5 axis Mori DMG with Siemens controls.
Essential Functions
Set up and operate, with knowledge of desirable speeds and feeds for various alloys. Ability to safely and effectively fixture and set up a variety of castings of various sizes and shapes. Knowledge of standard G codes, ability to use various measuring equipment to verify work performed along with the ability to offset and edit if needed to attain a quality part the first time every time. Ability to program is desirable. Majority of work is done on castings in a high mix low volume environment.
* Set up and operate CNC 5 Axis Milling
* Vertical and Horizontal Machining
* Experience with Mastercam preferred
* Experience with Solidworks a plus
Setup - Operation - Maintenance - Has attained very high level of proficiency and requires virtually no supervision. Can perform any operation that the machine is capable of doing and is capable of programming the machine, where applicable. Can set up any sequence of operations using any combination of tools with no outside help. Is extremely proficient at math required by job - is expert at using measuring instruments such as micrometers and other gauges. Performs routine cleaning and maintenance of machine including checking oil sight glasses. Performs periodic maintenance per the manufacturer's instructions. Can determine when it is necessary to have major maintenance performed to return the machine to normal operating condition.
Quality/Continuous Improvement/Productivity - Inspects own work - has very low rejection rate. Checks out program on first piece by positioning tool(s) for each operation, but not cutting until position is verified. Observes machine during entire automated machining operation - makes sure tools are sharp and performing correctly. Uses proven techniques to complete the required automated sequence of operations. Passes job on to next workstation in optimum time to maintain required quality and minimize rework
Problem Solving - Can work out virtually any problem that arises concerning work being performed - has usually seen some form of the problem before.
Blueprints & Traveler - Can not only correctly interpret the blueprints, but assists other Technicians and alerts Engineering to drawings that require correction. Can interpret all operations listed on Traveler documents that move with each job.
Environmental / Safety Issues
Normal exposure to coolant liquid, dust and fumes - limited exposure to hazardous materials. Keeps work area clean and free of scrap materials. Follows all safety rules applicable to machine as stated on posted signs and in Company policy.
Cross Training
Cross-trains on all of the machines listed in this position description as directed by the Machining Supervisor.
Training
Requirements for this position are to also be engaged in: 5S, Continuous Improvement, On-Time Delivery, Routine Total Preventative Maintenance and the submission of Improvement Ideas.
Education / Certification
High school graduate preferred - will consider commensurate experience. Has passed Certification Test established by the Company for each machine that is used without close supervision.
Requirements:
Generally has a minimum of 5 years" experience. Experience in Mastercam on horizontal CNC milling machine as well as VTL.
Program and setup 5 axis machine.
Working knowledge of other forms of CAD software, Vericut and Soildworks is a plus.
Understand GD&T, read and interpret blueprints.
Ability to hold tight tolerances.
Strong verbal communication.
Assist in helping operators to maintain production and quality.
Physical Requirements
Job requires standing most of the day. There is no repetitive motion. Since overhead cranes are available in all work areas, Technicians are not required to lift more than 50 pounds.
Input Material
Material comes from many sources, mainly nodular iron castings, aluminum castings, some steel, and some miscellaneous.
Finished Product
Ensures that finished product meets specifications and that it is moved to the next position on the Traveler in a timely manner.
