Address
Form of workJob Description
Supplier Quality Engineer. Direct Hire.
30% travel (Thailand and Mexico).
The Role
The Supplier Quality Engineer – Electronics will be dedicated to improving the incoming quality and reliability of printed circuit board assemblies sourced from key suppliers. They will work with a sourcing team member as the key liaisons between our global suppliers and our supply chain, quality, design engineering, and manufacturing engineering teams in the pursuit of comprehensive upstream In-circuit and functional test coverage and defect prevention.
Specific Job Responsibilities:
· Develop strong process knowledge and working relationships with client's PCBA manufacturers; visit sites regularly (Primarily Mexico and Thailand) to review quality practices and processes and work with suppliers to continually improve.
· Evaluate and report on PCBA supplier performance via monthly business reviews and quarterly scorecard reviews.
· Perform root cause analysis of non-conforming PCBAs and drive continuous improvement projects to reduce scrap, rework, and field (Warranty/DOA) failures.
· Issue Supplier Corrective Action Request (SCARs) and drive effective root cause identification and corrective/preventive actions.
· Collaborate with engineering and manufacturing to build product knowledge and skill set to develop functional test fixtures for mature products for use at suppliers and/or use internally.
· Develop best practices for establishing minimum test coverage and design rules to ensure PCBAs are testable using ICT, FCT, Flying Probe or other appropriate means.
· Conduct supplier audits and ensure closure of all ensuing actions.
· Act as lead for “first article” qualification of new and revised PCBAs.
· Join NPI project teams (New Product Introduction) to ensure that adequate supplier-based risk-reduction has been performed prior to release of new products.
· Partner with 3rd party In-Circuit and Functional Test development firms to define and execute test plans for PCBAs.
· Work with key suppliers to support product transfers from Thailand to Mexico and form US-based prototype facilities to the longer term production locations.
· Define incoming inspection plans for PCBAs.
Qualifications:
· Bachelor’s degree or higher education in Electrical Engineering or manufacturing
· Minimum 5 years’ work experience in Engineering with a minimum of five years in Supplier Quality Engineering.
· Technical background or experience in PCBA manufacturing and fabrication processes, rules, technical challenges, and acceptance criteria (SMT, AOI, X-ray, ICT, FCT)
· Experience with cross functional team settings transitioning products from Design to Production.
· Experience conducting supplier assessments/audits to ISO or other standards.
· Excellent interpersonal, problem solving, and communication skills.
· Electronic Equipment Manufacturing: 3 years (Preferred)
· Certification to IPC-A-600, IPC-A-610, IPC-J-Std-001 (Preferred)
· ISO Quality Standards and Quality Systems: 5 years (Preferred)
· ASQ CQE or CQA certification preferred.
#3401
AllSTEM Connections is proud to be an Equal Opportunity Employer. We believe in people, and we are committed to working with people of all backgrounds and connecting them with clients and companies who share our goals of diversity and inclusiveness. All qualified applicants will receive consideration for employment without regard to race, religion, ancestry, color, national origin, age, gender identity or expression, genetic information, marital status, medical condition, disability, protected veteran status, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable federal, state, or local laws.
The Know Your Rights poster is available here:
https://www.eeoc.gov/sites/default/files/2023-06/22-088_EEOC_KnowYourRights6.12.pdf
The pay transparency policy is available here:
https://www.dol.gov/sites/dolgov/files/ofccp/pdf/pay-transp_%20English_formattedESQA508c.pdf
For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required.
We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team.
AllSTEM Connections participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program.
https://e-verify.uscis.gov/web/media/resourcesContents/E-Verify_Participation_Poster_ES.pdf
Company Description30% travel (Thailand and Mexico).
The Role
The Supplier Quality Engineer – Electronics will be dedicated to improving the incoming quality and reliability of printed circuit board assemblies sourced from key suppliers. They will work with a sourcing team member as the key liaisons between our global suppliers and our supply chain, quality, design engineering, and manufacturing engineering teams in the pursuit of comprehensive upstream In-circuit and functional test coverage and defect prevention.
Specific Job Responsibilities:
· Develop strong process knowledge and working relationships with client's PCBA manufacturers; visit sites regularly (Primarily Mexico and Thailand) to review quality practices and processes and work with suppliers to continually improve.
· Evaluate and report on PCBA supplier performance via monthly business reviews and quarterly scorecard reviews.
· Perform root cause analysis of non-conforming PCBAs and drive continuous improvement projects to reduce scrap, rework, and field (Warranty/DOA) failures.
· Issue Supplier Corrective Action Request (SCARs) and drive effective root cause identification and corrective/preventive actions.
· Collaborate with engineering and manufacturing to build product knowledge and skill set to develop functional test fixtures for mature products for use at suppliers and/or use internally.
· Develop best practices for establishing minimum test coverage and design rules to ensure PCBAs are testable using ICT, FCT, Flying Probe or other appropriate means.
· Conduct supplier audits and ensure closure of all ensuing actions.
· Act as lead for “first article” qualification of new and revised PCBAs.
· Join NPI project teams (New Product Introduction) to ensure that adequate supplier-based risk-reduction has been performed prior to release of new products.
· Partner with 3rd party In-Circuit and Functional Test development firms to define and execute test plans for PCBAs.
· Work with key suppliers to support product transfers from Thailand to Mexico and form US-based prototype facilities to the longer term production locations.
· Define incoming inspection plans for PCBAs.
Qualifications:
· Bachelor’s degree or higher education in Electrical Engineering or manufacturing
· Minimum 5 years’ work experience in Engineering with a minimum of five years in Supplier Quality Engineering.
· Technical background or experience in PCBA manufacturing and fabrication processes, rules, technical challenges, and acceptance criteria (SMT, AOI, X-ray, ICT, FCT)
· Experience with cross functional team settings transitioning products from Design to Production.
· Experience conducting supplier assessments/audits to ISO or other standards.
· Excellent interpersonal, problem solving, and communication skills.
· Electronic Equipment Manufacturing: 3 years (Preferred)
· Certification to IPC-A-600, IPC-A-610, IPC-J-Std-001 (Preferred)
· ISO Quality Standards and Quality Systems: 5 years (Preferred)
· ASQ CQE or CQA certification preferred.
#3401
AllSTEM Connections is proud to be an Equal Opportunity Employer. We believe in people, and we are committed to working with people of all backgrounds and connecting them with clients and companies who share our goals of diversity and inclusiveness. All qualified applicants will receive consideration for employment without regard to race, religion, ancestry, color, national origin, age, gender identity or expression, genetic information, marital status, medical condition, disability, protected veteran status, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable federal, state, or local laws.
The Know Your Rights poster is available here:
https://www.eeoc.gov/sites/default/files/2023-06/22-088_EEOC_KnowYourRights6.12.pdf
The pay transparency policy is available here:
https://www.dol.gov/sites/dolgov/files/ofccp/pdf/pay-transp_%20English_formattedESQA508c.pdf
For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required.
We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team.
AllSTEM Connections participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program.
https://e-verify.uscis.gov/web/media/resourcesContents/E-Verify_Participation_Poster_ES.pdf
Guiding Principles and Core Values: UP HIRE
Understanding Matters.
We actively listen to each other, our STEM professionals, and customers. We take the time to understand their needs to make the best connections in the industry.
People Matter.
People are at the center of our company. All decisions we make are in the best of interest of our employees, co-workers, communities, candidates and customers.
Honesty Matters.
We conduct our business with integrity and DO the right things. We ARE trustworthy partners WHO stand behind our work and people.
Innovation Matters.
We are disciplined in bringing forward new thought and solutions that guide the industry and grow our company. Continued growth secures sustainability that provides solid careers for our employees, stability for our STEM professionals, and reliability to our customers.
Relationships Matter.
We take personal responsibility for all relationships with our employees, co-workers, STEM professionals and customers. Courtesy, dignity and respect EQUAL high performance results.
Everything Matters.
We hold ourselves accountable to perform with the upmost of professionalism, attention to detail, and highest standard of service. We hit our targets and do what we say we will do.
Understanding Matters.
We actively listen to each other, our STEM professionals, and customers. We take the time to understand their needs to make the best connections in the industry.
People Matter.
People are at the center of our company. All decisions we make are in the best of interest of our employees, co-workers, communities, candidates and customers.
Honesty Matters.
We conduct our business with integrity and DO the right things. We ARE trustworthy partners WHO stand behind our work and people.
Innovation Matters.
We are disciplined in bringing forward new thought and solutions that guide the industry and grow our company. Continued growth secures sustainability that provides solid careers for our employees, stability for our STEM professionals, and reliability to our customers.
Relationships Matter.
We take personal responsibility for all relationships with our employees, co-workers, STEM professionals and customers. Courtesy, dignity and respect EQUAL high performance results.
Everything Matters.
We hold ourselves accountable to perform with the upmost of professionalism, attention to detail, and highest standard of service. We hit our targets and do what we say we will do.
