Address
Form of workJob Description
3rd shift - 11:00 p.m. to 7:10 a.m. Hourly Rate plus $3.00 shift differential
Essential Duties and Responsibilities include the following. Other duties may be
assigned.
Selects products for tests at specified stages in production process, and tests products for
variety of qualities such as dimensions, performance, and mechanical, electrical, or
chemical characteristics.
Records test data.
Evaluates data and writes reports to validate or indicate deviations from existing
standards.
Quarantines non-conforming material by tagging and writing reports.
Sets up and performs destructive and nondestructive tests on materials, parts, or products
to measure performance, life, or material characteristics.
Qualifications To perform this job successfully, an individual must be able to perform
each essential duty satisfactorily. The requirements listed below are representative of the
knowledge, skill, and/or ability required. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential functions.
Education and/or Experience
High school diploma or general education degree (GED).
Language Skills
Ability to read and interpret documents such as safety rules, operating and maintenance
instructions, and procedure manuals. Ability to write routine reports and correspondence.
Ability to speak effectively before groups of customers or employees of organization.
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers,
common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw
and interpret bar graphs.
Reasoning Ability
Ability to apply common sense understanding to carry out instructions furnished in
written, oral, or diagram form. Ability to deal with problems involving several concrete
variables in standardized situations.
Physical Demands The physical demands described here are representative of those that
must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to
perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand;
walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear.
The employee is frequently required to sit. The employee is occasionally required to
stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10
pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up
to 50 pounds. Specific vision abilities required by this job include close vision, distance
vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment The work environment characteristics described here are
representative of those an employee encounters while performing the essential functions
of this job. Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions.
While performing the duties of this Job, the employee is occasionally exposed to moving
mechanical parts; fumes or airborne particles; toxic or caustic chemicals; risk of electrical
shock and vibration. The noise level in the work environment is usually moderate. Bump
caps, steel toe safety shoes, and safety glasses are required in all production areas.
Hearing protection is encouraged and may be required in specific areas
3rd shift - 11:00 p.m. to 7:10 a.m. Hourly Rate plus $3.00 shift differential
Essential Duties and Responsibilities include the following. Other duties may be
assigned.
Selects products for tests at specified stages in production process, and tests products for
variety of qualities such as dimensions, performance, and mechanical, electrical, or
chemical characteristics.
Records test data.
Evaluates data and writes reports to validate or indicate deviations from existing
standards.
Quarantines non-conforming material by tagging and writing reports.
Sets up and performs destructive and nondestructive tests on materials, parts, or products
to measure performance, life, or material characteristics.
Qualifications To perform this job successfully, an individual must be able to perform
each essential duty satisfactorily. The requirements listed below are representative of the
knowledge, skill, and/or ability required. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential functions.
Education and/or Experience
High school diploma or general education degree (GED).
Language Skills
Ability to read and interpret documents such as safety rules, operating and maintenance
instructions, and procedure manuals. Ability to write routine reports and correspondence.
Ability to speak effectively before groups of customers or employees of organization.
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers,
common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw
and interpret bar graphs.
Reasoning Ability
Ability to apply common sense understanding to carry out instructions furnished in
written, oral, or diagram form. Ability to deal with problems involving several concrete
variables in standardized situations.
Physical Demands The physical demands described here are representative of those that
must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to
perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand;
walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear.
The employee is frequently required to sit. The employee is occasionally required to
stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10
pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up
to 50 pounds. Specific vision abilities required by this job include close vision, distance
vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment The work environment characteristics described here are
representative of those an employee encounters while performing the essential functions
of this job. Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions.
While performing the duties of this Job, the employee is occasionally exposed to moving
mechanical parts; fumes or airborne particles; toxic or caustic chemicals; risk of electrical
shock and vibration. The noise level in the work environment is usually moderate. Bump
caps, steel toe safety shoes, and safety glasses are required in all production areas.
Hearing protection is encouraged and may be required in specific areas
