Address
Form of workpSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor's 30-year legacy of technology advancements and strong IP portfolio but with a new mission-to enhance Murata's world-class capabilities with high-performance semiconductors. With a strong foundation in RF integration, pSemi's product portfolio now spans power management, connected sensors, optical transceivers, antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, IoT devices and healthcare. From headquarters in San Diego and offices around the world, pSemi's team explores new ways to make electronics for the connected world smaller, thinner, faster and better.
Job Summary
Intern will verify (in simulation) and validate (with measurements) large analog/RF IC design over various operating conditions and modes of operation. The specific product class is Radio Frequency Integrated Circuits (RFIC) with digital control and analog/mixed-signal (AMS) interfaces. Tasks may include root-cause of failures or development of improvements to meet specifications. The candidate will support products during the entire product life cycle from product definition through product release to end-of-life. As part of a cross-functional product development team the candidate will support other essential disciplines including characterization, production engineering, and test engineering.
Roles & Responsibilities
This position has responsibility for:
- Circuit Analysis: understand principles of circuit operation, derive mathematical descriptions, understand trade-offs, prescribe improvements
- Data Analysis: harness results of tests, determining pass/fail criterion, statistical analysis, hypothesis testing
- Modeling: analyze application of solution and drive non-idealities back to simulation/measurement
- Automation: Define, architect, and implement automation suite to simulate design functionality over modes of operation, process, temperature, voltage, and other environmental conditions
- Test Development: aid in construction of directed tests, schematic entry of tests, definition of outputs, manual simulations, and script-based simulations
- Data Visualization: plot outputs, group and annotate outputs
Competency Requirements
In order to perform the job successfully, an individual should demonstrate the following competencies:
- Critical Thinking: Skilled at finding logical flaws in arguments and plans; identifies problems and solutions that others might miss; provides detailed insight and constructive criticism into problems and complex situations
- Working with Ambiguity: Achieves forward progress in the face of poorly defined situations and/or unclear goals; able to work effectively with limited or partial information
- Displaying Technical Expertise: Keeps his/her technical skills current; effectively applies specialized knowledge and skills to perform work tasks; understands and masters the technical skills, knowledge, and tasks associated with his/her job; shares technical expertise with others.
- Driving for Results: Aggressively pursues challenging goals and objectives; willingness to put in considerable time and effort to accomplish objectives; takes a highly focused, goal driven approach toward work
- Making Accurate Judgments and Decisions: Bases decisions on a systematic review of relevant facts and information; avoids making assumptions or rushing to judgment; provides clear rationale for decisions
Minimum Qualifications (Experience and Skills)
- Classes in analog circuit design and circuit analysis
- Classes or experience with circuit simulators (Cadence spectre, or any SPICE)
- Classes or experience with RF design concepts (S-parameters, matching, IP, Noise Figure)
- Knowledge of RF and analog circuit concepts, including circuit analysis, bias, gain, linearity, noise, small-signal vs large-signal behavior, power, and time-domain vs frequency-domain analysis
- Understanding CMOS/SOI processing, device physics, IC development process
- Understanding of digital programming concepts such as truth tables, decoders, register maps, and serial interfaces
- Strength in documentation clarity and completeness
- Willingness to collaborate, take initiative to solve challenges, humble approach to problem-solving
- Knowledge of interpreted (scripting) languages such as Ruby or Python, especially for data analysis and task automation
Preferred Qualifications
- Classes in RF circuit design or electromagnetIC Design/analysis
- Classes in digital design or mixed-signal design/analysis
- Classes or experience with circuit simulators (Cadence Spectre, ADS, or any SPICE)
- Classes or experience with electromagnetic simulators (HFSS, EMX, Momentum, Sonet, etc.)
Education Requirements
- BSEE in progress (must be completing 3+ yr)
or - MSEE enrolled/in-progress
Work Environment
This job operates in a professional office environment. This role routinely uses standard office equipment.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to occasionally lift office products and supplies, up to 20 pounds.
USD 30.83 - 57.20 per hour
Job Summary
Intern will verify (in simulation) and validate (with measurements) large analog/RF IC design over various operating conditions and modes of operation. The specific product class is Radio Frequency Integrated Circuits (RFIC) with digital control and analog/mixed-signal (AMS) interfaces. Tasks may include root-cause of failures or development of improvements to meet specifications. The candidate will support products during the entire product life cycle from product definition through product release to end-of-life. As part of a cross-functional product development team the candidate will support other essential disciplines including characterization, production engineering, and test engineering.
Roles & Responsibilities
This position has responsibility for:
- Circuit Analysis: understand principles of circuit operation, derive mathematical descriptions, understand trade-offs, prescribe improvements
- Data Analysis: harness results of tests, determining pass/fail criterion, statistical analysis, hypothesis testing
- Modeling: analyze application of solution and drive non-idealities back to simulation/measurement
- Automation: Define, architect, and implement automation suite to simulate design functionality over modes of operation, process, temperature, voltage, and other environmental conditions
- Test Development: aid in construction of directed tests, schematic entry of tests, definition of outputs, manual simulations, and script-based simulations
- Data Visualization: plot outputs, group and annotate outputs
Competency Requirements
In order to perform the job successfully, an individual should demonstrate the following competencies:
- Critical Thinking: Skilled at finding logical flaws in arguments and plans; identifies problems and solutions that others might miss; provides detailed insight and constructive criticism into problems and complex situations
- Working with Ambiguity: Achieves forward progress in the face of poorly defined situations and/or unclear goals; able to work effectively with limited or partial information
- Displaying Technical Expertise: Keeps his/her technical skills current; effectively applies specialized knowledge and skills to perform work tasks; understands and masters the technical skills, knowledge, and tasks associated with his/her job; shares technical expertise with others.
- Driving for Results: Aggressively pursues challenging goals and objectives; willingness to put in considerable time and effort to accomplish objectives; takes a highly focused, goal driven approach toward work
- Making Accurate Judgments and Decisions: Bases decisions on a systematic review of relevant facts and information; avoids making assumptions or rushing to judgment; provides clear rationale for decisions
Minimum Qualifications (Experience and Skills)
- Classes in analog circuit design and circuit analysis
- Classes or experience with circuit simulators (Cadence spectre, or any SPICE)
- Classes or experience with RF design concepts (S-parameters, matching, IP, Noise Figure)
- Knowledge of RF and analog circuit concepts, including circuit analysis, bias, gain, linearity, noise, small-signal vs large-signal behavior, power, and time-domain vs frequency-domain analysis
- Understanding CMOS/SOI processing, device physics, IC development process
- Understanding of digital programming concepts such as truth tables, decoders, register maps, and serial interfaces
- Strength in documentation clarity and completeness
- Willingness to collaborate, take initiative to solve challenges, humble approach to problem-solving
- Knowledge of interpreted (scripting) languages such as Ruby or Python, especially for data analysis and task automation
Preferred Qualifications
- Classes in RF circuit design or electromagnetIC Design/analysis
- Classes in digital design or mixed-signal design/analysis
- Classes or experience with circuit simulators (Cadence Spectre, ADS, or any SPICE)
- Classes or experience with electromagnetic simulators (HFSS, EMX, Momentum, Sonet, etc.)
Education Requirements
- BSEE in progress (must be completing 3+ yr)
or - MSEE enrolled/in-progress
Work Environment
This job operates in a professional office environment. This role routinely uses standard office equipment.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to occasionally lift office products and supplies, up to 20 pounds.
USD 30.83 - 57.20 per hour
pSemi Corporation supports a diverse workforce and is committed to a policy of equal employment opportunity for applicants and employees. pSemi does not discriminate on the basis of age, race, color, religion (including religious dress and grooming practices), sex/gender (including pregnancy, childbirth, or related medical conditions or breastfeeding), gender identity, gender expression, genetic information, national origin (including language use restrictions and possession of a driver's license issued under Vehicle Code section 12801.9), ancestry, physical or mental disability, legally-protected medical condition, military or veteran status (including "protected veterans" under applicable affirmative action laws), marital status, sexual orientation, or any other basis protected by local, state or federal laws applicable to the Company. pSemi also prohibits discrimination based on the perception that an employee or applicant has any of those characteristics, or is associated with a person who has or is perceived as having any of those characteristics.
Note: The Peregrine Semiconductor name, Peregrine Semiconductor logo and UltraCMOS are registered trademarks and the pSemi name, pSemi logo, HaRP and DuNE are trademarks of pSemi Corporation in the U.S. and other countries. All other trademarks are the property of their respective companies. pSemi products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
Additional Position Information:
