Engineering Technician

QUALIFICATIONS

In order to be rated as qualified for this position, the HR Office must be able to determine that you meet the education and/or specialized experience requirement - this information must be clearly supported in the resume.
For GS-05: One year of specialized experience equivalent to at least the next lower grade level GS-04 in the federal service. Specialized experience at this level is defined as preparing general layouts for engineering and geologic drawings using CADD software. OR Successful completion of a full 4-year course of study leading to a bachelor’s degree (a) with major study in an appropriate field of engineering, construction, or industrial technology; or (b) that included at least 24 semester hours in any combination of courses such as engineering, engineering or industrial technology, construction, physics, drafting, surveying, physical science, or mathematics. OR A combination of specialized experience and education (in excess of the first 60 semester hours) that meets 100% of the qualification requirements for the position. Your education must have included at least 24 semester hours in any combination of courses such as such as engineering, engineering or industrial technology, construction, physics, drafting, surveying, physical science, or mathematics.
For GS-06: One year of specialized experience equivalent to at least the next lower grade level GS-05 in the federal service. Specialized experience at this level is defined as drafting assignments assisted in engineering projects and investigations; using Civil Engineering design software; and serving on a team of Engineers and Engineering Technicians producing drawings for use on a variety of construction and rehabilitation projects; OR Successful completion of one full year of graduate level education that is related to the position being filled.
For GS-07: One year of specialized experience equivalent to at least the next lower grade level GS-06 in the federal service. Specialized experience at this level is defined as Use of CADD software to prepare sketches, drawings, diagrams and charts; use of Civil Engineering software to design and document transportation, water or hydroelectric systems; and drafting technical documentation of engineering work by conducting research, collecting data and writing reports. OR Successful completion of one full year of graduate level education that is related to the position being filled.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
You must meet all Eligibility and Qualification requirements, including any selective placement factors if applicable, by 03/30/2023.

EDUCATION

This vacancy announcement allows substituting education for experience. You must submit a copy of college transcript(s) (unofficial copy is acceptable) to support claimed education if substituting education for experience. Transcripts must include the name of the college or university and date the degree was conferred. A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not-qualified for the position.
You will be required to provide official college transcripts to verify educational qualifications, if selected. An official transcript must be sent directly from the University’s Registrar’s office and must be provided from the institution awarding the degree. Academic transcripts certified by notary publics are NOT official. Official transcripts must be submitted prior to reporting to work as a condition of employment. Failure to submit official transcripts may be grounds for dismissal or rescission of the job offer.
Accreditation: Only education from an accredited college or university recognized by the Department of Education is acceptable to meet education requirements or to substitute for experience, if applicable. For additional info, refer to the Office of Personnel Management and U.S. Department of Education.
Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. For additional info, refer to the U.S. Network for Education Information.

IF YOU ARE RELYING ON YOUR EDUCATION TO MEET QUALIFICATION REQUIREMENTS:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

• How to Apply

??????In order to be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires successful completion of additional assessment(s), including a technical assessment and a written assessment. These assessments measure the critical competencies listed above that are required to successfully perform the job.
Your answers will be verified against information provided in your resume. Your resume must clearly support the responses to all the questions by addressing experience, education, and/or training relevant to this position. You must make a fair and accurate assessment of your qualifications. If a determination is made that you have rated yourself higher than what is apparent in the description of your experience, competencies, skills, and/or education/training (or that your resume/application is incomplete), you could be rated ineligible or your score could be lowered.
Applications (resume, assessment questionnaire, and supporting documentation) for this vacancy MUST be received online BEFORE midnight Eastern Time (Washington, DC time) on 03/30/2023. To apply, click the blue APPLY ONLINE button at the top of the page.
Do not submit photographs with the application package. Documents with photographs may not be seen by hiring officials - applicant must remove any images from badges, licenses, etc.

IF YOU ARE RELYING ON YOUR EDUCATION TO MEET QUALIFICATION REQUIREMENTS:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Help

DUTIES

• Prepares general layouts, engineering designs, geologic drawings and cost estimates for projects such as dams, power-plants, pumping plants, transportation, building construction, recreational areas and irrigation distribution systems utilizing standard methods as established in Directives and Standards, design standards, geologic standards and manuals.
• Receives direction from Reclamation engineers/geologists and higher graded technicians when significant deviation from standard practices are required. Identifies and evaluates alternative engineering plans for accomplishing project purposes established by engineers. Exercises judgment and makes recommendations to engineer on most effective plans for accomplishing the project purpose.
• Performs engineering computations and checks computations performed by division engineers by compiling and computing quantities from final drawings, lists and extracting engineering data from records, specifications, drawings, tabulations, etc. Prepares narrative statements explaining methodology of calculations and sources of data as needed.
• Utilizes Autodesk Data Platform (ADP) and Computer Aided Design and Drafting (CADD) systems to develop methods to accomplish engineering oriented work such as Bureau specifications and engineering drawings and designs. Develops and uses state-of-the-art methods with PCs, CADD, Geographic Information Systems (GIS) and other specialized engineering software to accomplish duties.
• Works with and maintains contacts with higher graded technicians, computer specialists, engineers, geologists and other Regional and Area Office Staff to accomplishing duties.

Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide to the application questionnaire, and the result of the additional assessments required for this position. You will be assessed on the following Competencies (knowledge, skills, abilities, and other characteristics):

• Attention to Detail
• Customer Service (Clerical/Technical)
• General Engineering
• Integrity/Honesty
• Interpersonal Skills
• Oral Communication
• Technical Competenc