Civil Engineer

This position serves a Senior Civil Engineer for airport and heliport design within the Office of Airports, Airports Design and Construction Branch, AAS-110. The incumbent serves as a principal technical specialist responsible for the application of Civil Engineers and consultants in the interpretation and development of standards, specifications, criteria, and guidelines for airport/heliport design, construction, techniques, quality control, maintenance and management.

Qualifications:

To qualify for this position, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to the FV-I, FG/GS-13 level. This experience is typically related to the line of work of the position to be filled and which has equipped the applicant with the particular knowledge, skills, and abilities to successfully perform the duties of the position. To be creditable, specialized experience must have been at least equivalent to the next lower level in the normal line of progression for the occupation in the organization.

SPECIALIZED EXPERIENCE is defined as:

-Experience utilizing principles, standards, specifications, criteria and guidelines for airport/heliport design, including AC 150/5300-13 Airport Design.

AND

-Experience leading or participating on workgroups or projects related to airport/heliport design and construction.

You should include relevant examples of the specialized experience in your work history. Errors or omissions may impact your rating or may result in you not being considered.

Answer all questions to the best of your ability. DO NOT ASSUME THAT BECAUSE YOU HOLD, OR HAVE HELD THIS POSITION, YOU WILL AUTOMATICALLY BE FOUND ELIGIBLE. You may be asked to provide evidence or documentation that you have this type of experience later in the selection process. Your responses are subject to verification through job interviews, or any other information obtained during the application process. Any exaggeration of your experience or any attempt to conceal information can result in disqualification.

*Applicants who fail to demonstrate possession of any of the above criteria AND who do not provide the required documentation will receive no further consideration for this position.*

Applicants may be asked to verify information on your application for employment with the FAA.

**All qualification requirements must be met by the closing date of this vacancy announcement.**

Eligible applicants meeting the minimum qualification requirements and/or selective placement factor(s) (SPF) may be further evaluated on the Knowledge, Skills and Abilities (KSA) and/or Quality Ranking Factor (QRF) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: (1) score order; (2) category grouping; (3) alphabetical; or (4) priority grouping, and referred to the selecting official for selection consideration.

Education: This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).
Failure to do so will result in loss of consideration.
Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.
Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

Basic Requirements:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR;

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

Employment Type: FULL_TIME