Civil Engineer

In this position you will serve as a Civil Engineer, the Department of Homeland Security, Federal Emergency Management Agency, Regional Office, Regional 9, Mitigation Division. The ideal candidate for this position will have experience serving as a project engineer, providing advice and engineering guidance related to dam safety and the rehabilitation of dam hazards.

Qualifications: The qualification requirements listed below must be met within 30 days of the closing date of the announcement.

To qualify for this position at the GS-13 level, you must possess one full year of specialized experience equivalent to at least the GS-12 level in the Federal government, which has equipped you with the skills needed to successfully perform the duties of the position. Experience may be obtained in the Federal or Private Sector and must demonstrate all of the following:

• Planning and/or conducting dam or levee safety monitoring inspections and/or evaluations; and,
• Providing technical assistance related to the potential consequences of dam-related emergencies for the purposes of mitigating the hazard; and,
• Building effective relationships with stakeholders (such as local communities or state agencies) for the purposes of executing a project.

In addition to the minimum qualifications described above, you must meet the following requirement(s) to be considered qualified for the position:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Please read the following important information to ensure we have everything we need to consider your application:

• Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position.

• Please limit your resume to five pages. If more than five pages are submitted, only the first five pages will be reviewed to determine your eligibility and qualifications.

• Your resume serves as the basis for experience related qualification determinations, and you must highlight your most relevant and significant work experience and education (if applicable), as it relates to this job opportunity. Please use your own words, be clear, and specific when describing your work history. We cannot make assumptions regarding your experience.

Are you qualifying based on your work experience?

• Qualifications are based on your ability to demonstrate in your resume that you possess one year of the specialized experience for this announcement at a comparable scope and responsibility. To ensure all of the essential information is in your resume, we encourage you to use the USAJOBS online Resume Builder. If you choose to use your own resume, it must contain the following information organized byexperience/position: (1) job title, (2) name of employer, (3) start and end dates of each period of employment (from MM/DD/YY to MM/DD/YY), (4) detailed description of duties performed, accomplishments, and related skills, and (5) hours worked per week (part-time employment will be prorated in crediting experience). Federal experience/positions must also include the occupational series, grade level, and dates in which you held each grade level.

• Are you a current or former FEMA Reservist/Disaster Assistance Employee (DAE)? To accurately credit your experience from intermittent positions and Reservist Deployments, you must list the dates (from MM/DD/YY to MM/DD/YY) of deployments that are relevant to your qualifying experience, along with the job title and specific duties you were responsible for during each deployment.

• Determining length of General or Specialized Experience is dependent on the above information. Failure to provide the above information in your resume may result in your application being found "not qualified."

• Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills, and provides valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

• For additional information on crediting experience and/or education, please reference the OPM General Schedule Qualification Standards.

Education:

Positive Education Requirement: This position has a positive education requirement, as outlined in the "requirements" section. You must submit a copy of your transcripts (unofficial are acceptable) with your online application. Once selected and prior to appointment, applicants must provide official college transcripts.

Education completed in foreign colleges or universities may be used to meet Federal qualification requirements if you can show that your foreign education is comparable to education received in accredited educational institutions in the United States. For example, specific courses accepted for college-level credit by an accredited U.S. college or university, or foreign education evaluated by an organization recognized for accreditation by the Department of Education as education equivalent to that gained in an accredited U.S. college or university. It is your responsibility to provide such evidence with your application. Visit the Department of Education's Recognition of Foreign Qualifications for more information.

Employment Type: FULL_TIME