Manufacturing Lab Tech

I am a recruiting consultant with Artech, and I am hoping I can help you find the perfect next opportunity for your career goals. You very well could be happy in your present role but might be looking for a more challenging project or maybe you want to explore opportunities outside your comfort zone. I am currently recruiting for an Manufacturing Lab Techfor one of our clients in the US. Below are the specs for the role:
Manufacturing Lab Tech
6650 Saukview Drive, Saint Cloud, MN - 56303
3 to 6 Months
3 pm- 11 pm
Instructions to Suppliers:
• The following questions should be asked to the candidate as part of their interview with you before submitting them to the role.
• In terms of responses expected in the interviews, we are looking for someone who can communicate in English. They must be able to work the shift hours that the position is posted for with the ability to work overtime as needed. We want someone who is interested and motivated by our mission "Improving lives by improving sight". This is a fast paced working environment and the person will be expected to learn quickly and produce quality results.
1. What interests you most about Essilor, or our specific lab locations?
Show them our mission statement and ask what they think about it.
2. Have you worked in an environment where you are measured by productivity per hour? If no, how were you held accountable to your performance? If yes, were you able to meet your goals? What challenges did you face in this type of setting?
3. Describe your attendance at your previous company.
4. In our busy season, will you be able to work overtime including weekends?
5. Tell me about a time when you took the initiative to do something without being told. (Note for supplier: Entrepreneurial Spirit and Working Together are 2 of our core values and we would be looking for someone that is willing to help out their team and take initiative)
6. Tell me about a time when you had a conflict with a co-worker. How did you deal with this?
7. What do you do to stay motivated while performing repetitive tasks?
Thank you
About this role:
Coating: Specific duties include clipping, operating the coating machines and inspecting the lenses.
Finishing: beveling, mounting the lenses, edging, blocking lenses, tinting and inspecting.
Surfacing: taping and blocking the lenses, generating, polishing and lens washing.
In particular, you can expect to:
§ Coating:
o Clipper: Clip and secure lenses into baskets to begin the coating process.
o Machine Operator: Prepare and operate the coating machine to coat the lenses properly.
§ Load machine chemicals
§ Load and unload sectors with lenses
o Inspector: Inspect lenses to ensure that they are optically and cosmetically accurate.
§ Finishing:
o Beveler: Utilize the bevel wheel to remove the sharp edges of the lens.
o Mounter: Accurately apply drill holes to the lenses to ensure proper fit and alignment of the lenses and insert lenses into the frame while ensuring proper fit.
o Edger Operator: Operate a variety of edging machines to cut lenses down to proper size and shape to fit the appropriate frame.
o Finish Layout: prepare an uncut lens for the edging process by outlining the center/alignment markings and affixing the chuck/block.
o Tinter: Accurately tint all lenses going through the tinting department.
o Inspection: Inspect lenses and frames to ensure that they are optically and cosmetically accurate.
§ Surfacing:
o Surfacing Blocker: Utilize the blocking machine to accurately secure a block to all lenses going through the surfacing department. Operate taping equipment to apply protective tape to the front of the lenses.
o Generator Operator: Operate the generator machine used to cut the lenses to the correct prescription.
o Surface Finer/Polisher: Operate the equipment used to fine and polish all lenses going through the surfacing department.
o Lens Washer: Hand wash and dry lenses followed by a brief cosmetic inspection of the lenses. Grasp lens with de-blocking cup and strike against table to remove block from lenses. Remove tape from lenses.
In particular, you will have the following accountabilities:
Engagement
Mission
Participate in Stand-up Meetings
Provide feedback to supervisors and coworkers (Communication)
Quality Right the First Time
Best Practice sharing
Stop the Line fully implemented
Customer Feedback process
Clean, Standardize, Audit and Approve
5s
Workstations Optimized
Work cell led improvements
Red/Green Board Monitoring
Flow and Balance
Small batch flow
Pull System
Launch Criteria
Balance Flow
FIFO
To be successful, you will need:
· High school diploma or equivalent.
High mechanical aptitude
· Ability to read/write and comprehend simple instructions, short correspondence, and memos.
· Ability to communicate effectively in a team environment.
· Working in a role with measurable standards and a dynamic production environment.
· Depth perception and manual dexterity.
· Ability to work overtime as needed.
· Previous experience in an optical lab production environment is strongly preferred but not required.
Physical demands you will expect in your work environment:
· Regularly stand/walk for the duration of shift.
· Consistently lift and move up to 15lb above shoulder height and waist high unaccompanied.
· The noise level in the laboratory is generally moderate.
· Regularly required to work with or around chemicals.
· Work area may be wet/dirty and or have a strong smell.
Click “APPLY” to send your resume for this role or you can send an email to me at . You can also reach me directly at (973) 425- 5998.