Address
Form of work 0600 to 1430
NOTE: All workers will be subjected to Temperature Monitoring prior to entering the facility. Face Covering Required at all times while at facility. Attire- Non-Logo Tee Shirt Red, Blk, or Grey- Non Log Baseball cap if applicable Proper safety footwear required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below: Foot Protection Provide ANSI Z41-compliant or local country-equivalent protective footwear. CCSWB Safety Shoe Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at ***/higher and a minimum of 6" inches or higher.
General Purpose
Responsible for operating various manual and automated equipment in the production process.
Duties and Responsibilities
Set up machinery and ensure all production materials are available.
Operate and monitor equipment and replenish materials as needed.
Visually inspect production run and document results.
Determine and report malfunctions to appropriate parties.
Maintain cleanliness of equipment and assigned area.
Qualifications
Education: High School diploma or equivalent preferred.
Experience: 1-3 year of general work experience required. Prior production/manufacturing machine operation experience preferred. Previous experience within high-speed industrial environment. Ability to operate manufacturing equipment. Knowledge of industrial technology a plus. Basic math skills and reading comprehension.
CCSWB Safety specification applies to all Manufacturing, Manufacturing-Combo's, Distribution/Sales Centers, Fleet and Warehouse facility areas. This policy also applies to all associates that perform job tasks/functions that require the use of Personal Protective Equipment (PPE) at Client Southwest Beverages LLC (CCSWB) up to and including all Commercial, Sales and Administrative Job functions contingent upon required work area(s) and/or required job task(s) being performed. The provisions of the Personal Protective Equipment Program apply to all Client Southwest Beverages personnel, visitors, contractors, suppliers, vendors, and temporary workers.
NOTE: STEEL TOE BOOTS REQUIRED
Safety Boots are required while conducting specific job task(s) in Production, Distribution, Warehouse and Sales operations.
All footwear MUST be a minimum of 6" high, no Low-Cut shoes should be worn. Temp Laborers don't have access to the order shoes from Lehigh. That's only for CCSWB associates.
All footwear MUST be Puncture Resistant (Kevlar Bottom).
All footwear MUST have a Class 75 Protective Toe (Steel or Composite Toe)
All footwear MUST have slip-resistant soles that meets requirements.
Proper safety footwear is required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below:
Foot Protection Provide ANSI Z41-compliant or local country-equivalent protective footwear. CCSWB Safety Footwear Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at ***/higher and a minimum of 6" inches or higher.
NOTE: All workers will be subjected to Temperature Monitoring prior to entering the facility. Face Covering Required at all times while at facility. Attire- Non-Logo Tee Shirt Red, Blk, or Grey- Non Log Baseball cap if applicable Proper safety footwear required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below: Foot Protection Provide ANSI Z41-compliant or local country-equivalent protective footwear. CCSWB Safety Shoe Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at ***/higher and a minimum of 6" inches or higher.
General Purpose
Responsible for operating various manual and automated equipment in the production process.
Duties and Responsibilities
Set up machinery and ensure all production materials are available.
Operate and monitor equipment and replenish materials as needed.
Visually inspect production run and document results.
Determine and report malfunctions to appropriate parties.
Maintain cleanliness of equipment and assigned area.
Qualifications
Education: High School diploma or equivalent preferred.
Experience: 1-3 year of general work experience required. Prior production/manufacturing machine operation experience preferred. Previous experience within high-speed industrial environment. Ability to operate manufacturing equipment. Knowledge of industrial technology a plus. Basic math skills and reading comprehension.
CCSWB Safety specification applies to all Manufacturing, Manufacturing-Combo's, Distribution/Sales Centers, Fleet and Warehouse facility areas. This policy also applies to all associates that perform job tasks/functions that require the use of Personal Protective Equipment (PPE) at Client Southwest Beverages LLC (CCSWB) up to and including all Commercial, Sales and Administrative Job functions contingent upon required work area(s) and/or required job task(s) being performed. The provisions of the Personal Protective Equipment Program apply to all Client Southwest Beverages personnel, visitors, contractors, suppliers, vendors, and temporary workers.
NOTE: STEEL TOE BOOTS REQUIRED
Safety Boots are required while conducting specific job task(s) in Production, Distribution, Warehouse and Sales operations.
All footwear MUST be a minimum of 6" high, no Low-Cut shoes should be worn. Temp Laborers don't have access to the order shoes from Lehigh. That's only for CCSWB associates.
All footwear MUST be Puncture Resistant (Kevlar Bottom).
All footwear MUST have a Class 75 Protective Toe (Steel or Composite Toe)
All footwear MUST have slip-resistant soles that meets requirements.
Proper safety footwear is required (steel toe, puncture resistant sole, and provide above the ankle protection) as specifically stated below:
Foot Protection Provide ANSI Z41-compliant or local country-equivalent protective footwear. CCSWB Safety Footwear Specification: Puncture Resistant (Kevlar bottom); Class 75 protective toe; Slip-resistant soles that meet Mark II LS-oily/wet test at ***/higher and a minimum of 6" inches or higher.
