Job Description
Lay out, fit and weld fabricated components to assemble structural forms and bridge parts using gas and/or electric welding equipment as specified by layout. All duties will be performed at Primoris Heavy Civil roadway and bridge construction site.
General Requirements
- Practice safety rules.
- Follow verbal and written instructions.
- Safe use of hand & power tools.
- Report to and assist immediate supervisor.
- Perform quality work as determined by project specifications.
- Accountable for all tools and materials at the end of your shift.
- Must work well as part of a team.
Functional Requirements
- Select torch, torch tip, filler rod and flux, or electrode according to welding chart specifications or type and thickness of metal
- Connect regulator valves and hoses to oxygen and fuel gas cylinders and to welding torch
- Turn regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure to obtain desired flame, based on knowledge of gas-welding techniques
- Hold torch at proper angle to metal and guide along weld joint, applying filler rod to molten area to form weld
- Examine weld for bead size and other specifications
- May preheat work piece with torch
- May layout, position and tack weld work pieces
- May weld along vertical or overhead weld lines
- May scarf or groove weld prior to applying filled metal, using gas-welding equipment
- May chip or grind off excess weld, slag, or spatter
- May clean or degrease parts, using a wire brush or portable grinder
- May cut metal plates or structural shapes using gas torch
- May be required to pass start tests to meet certification standard of government agencies or professional associations
- Plan layout, assembly and welding.
- Lay out, position, align and fit components together.
- Bolt, clamp and tack weld parts to secure in position for welding.
- Set up equipment and weld parts.
- Assemble parts by bolting and riveting.
- Weld pipe, sheet metal, structural steel, brackets or other materials.
- Repair products by dismantling, straightening, reshaping and reassembling parts.
- Use cutting torch to cut materials and demo existing assemblies
Qualification Standards
- One (1) to four (4) years of experience in specified skill.
- Post-offer drug/alcohol screen and physical evaluation.
- New Hire Orientation Quiz
- Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace.
- Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.).
- Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.).
Physical Requirements
- Must comply with company’s drug and alcohol abuse policy.
- Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
- Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
- Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
- Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
- Must be able to stand or walk for long periods of time.
- Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
- Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.