Address
Form of workSummary
About the Position:
Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230. DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights.
This position is located at SCHOFIELD BARRACKS, HONOLULU, HI. You will work in the parameters of electrical, electronic, microwave, nucleonic, optical/laser, physical and dimensional measurements to the transfer level calibration, certification and evaluation of test, measurement, and equipment.
This job is open to
Clarification from the agency
See "Who May Apply" in the "Qualifications" section for more information on who is eligible to apply for this position.
Duties
Requirements
Conditions of Employment
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.
There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.
Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) PRECISION MEASUREMENT EQUIPMENT CALIBRATOR without more than normal supervision. - Failure to meet this Screen Out Element will result in an ineligible rating.
You will be evaluated on the basis of your level of competency in the following areas:
PHYSICAL EFFORT: The work may require long periods of standing or sitting along with some walking or bending. Requires frequent lifting, carrying, and handling of items weighing up to 40 pounds with occasional requirements to lift items in excess of 50 pounds.
WORKING CONDITIONS: The work is performed in laboratories and user facilities where technicians are exposed to the hazards high voltage, high pressure, high and low temperatures, chemicals and radiation. Calibrators must comply with all safety regulations applicable to the calibration mission.
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Additional information
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
You may claim Military Spouse preference.
Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.
You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
About the Position:
Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230. DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights.
This position is located at SCHOFIELD BARRACKS, HONOLULU, HI. You will work in the parameters of electrical, electronic, microwave, nucleonic, optical/laser, physical and dimensional measurements to the transfer level calibration, certification and evaluation of test, measurement, and equipment.
This job is open to
- Career transition (CTAP, ICTAP, RPL)
Federal employees who meet the definition of a "surplus" or "displaced" employee. - Family of overseas employees
Family members of a federal employee or uniformed service member who is or was, working overseas. - Federal employees - Competitive service
Current or former competitive service federal employees. - Individuals with disabilities
- Land & base management
Certain current or former term or temporary federal employees of a land or base management agency. - Military spouses
- Veterans
Clarification from the agency
See "Who May Apply" in the "Qualifications" section for more information on who is eligible to apply for this position.
Duties
- Calibrating test, measurement and diagnostic equipment (TMDE).
- Troubleshooting and repairing TMDE.
- Collecting and analyzing calibration data.
- Implementing, modifying and developing technical procedures.
- Utilizing automated systems to document test results and preparing reports
Requirements
Conditions of Employment
- One year trial/probationary period may be required.
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- Applicants must comply with the Exceptional Family Member Program requirements as outlined in the DoD Instruction 1315.19.
- Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230, DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights. Visit http://www.dtic.mil/whs/directives/corres/pdf/140025v1230.pdf.
- Temporary duty assignment (TDY) will be required 10% of work time.
- This position requires the incumbent to be able to obtain and maintain a Public Trust security clearance for the duration of appointment.
- Must be able to lift, carry and handle items weighing up to 40 pounds with occasional requirements to lift items in excess of 50 pounds.
- The work of this position is performed in laboratories and user facilities where technicians are exposed to the hazards of high voltage, high pressure, high and low temperatures, chemicals and radiation.
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
- 30 Percent or More Disabled Veterans
- Current Department of Army Civilian Employees Applying to OCONUS Positions
- Current Department of Defense (DOD) Civilian Employee (non-Army)
- Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
- Family Member Preference (FMP) for Overseas Employment
- Interagency Career Transition Assistance Plan
- Land Management Workforce Flexibility Act
- Military Spouse Preference (MSP) for Overseas Employment
- Non-Department of Defense (DoD) Transfer
- People with Disabilities, Schedule A
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Reinstatement
- Veterans Employment Opportunity Act (VEOA) of 1998
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.
There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.
Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) PRECISION MEASUREMENT EQUIPMENT CALIBRATOR without more than normal supervision. - Failure to meet this Screen Out Element will result in an ineligible rating.
You will be evaluated on the basis of your level of competency in the following areas:
- Ability To Do The Work Of The Position Without More Than Normal Supervision
- Ability to Interpret Instructions, Specification, etc. (includes blueprint reading)
- Ability To Use and Maintain Tools and Equipment
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Technical Practices (theoretical, precise, artistic)
- Theory and Instruments (Electrical Electronic) Used in Shop and Trade Practices
- Trouble Shooting
PHYSICAL EFFORT: The work may require long periods of standing or sitting along with some walking or bending. Requires frequent lifting, carrying, and handling of items weighing up to 40 pounds with occasional requirements to lift items in excess of 50 pounds.
WORKING CONDITIONS: The work is performed in laboratories and user facilities where technicians are exposed to the hazards high voltage, high pressure, high and low temperatures, chemicals and radiation. Calibrators must comply with all safety regulations applicable to the calibration mission.
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Additional information
- Direct deposit of pay is required.
- U.S. citizens overseas under ordinarily resident status are not eligible for appointment under the Status of Forces Agreement.
- Locality pay does not apply in the overseas area.
- If an employee brings a child to an overseas location and that child is entitled to attend a DoD school on a space-required basis in accordance with DoDEA Regulation 1342.13, the DoDEA and the Military Department responsible for providing related services will ensure that the child, if eligible for special education, receives a free appropriate public education, including related services pursuant to DoDI 1342.12 and DoDM 1342.12.
- If an employee brings an infant or toddler (up to 3 years of age) to an overseas location, and that infant or toddler, but for the child's age, is entitled to attend the DoDEA on a space-required basis in accordance with DoDEA Regulation 1342.13, then the Military Department responsible for EIS will provide the infant or toddler with the required EIS in accordance with the eligibility criteria consistent with DoDI 1342.12 and DoDM 1342.12.
- Employees (and family members) who require medical or dental care in the overseas location will be responsible for obtaining and paying for such care. Access for civilian employees and their families to military medical and dental treatment facilities is on a space-available and reimbursable basis only.
- Pay retention may be offered to selected applicants for positions at overseas locations. Pay retention will not be offered as an incentive for employees moving between overseas positions.
- Selectees may receive certain foreign area benefits such as: Living Quarters Allowance (LQA) or government quarters, home leave, etc. Selectees will have their eligibility for foreign area benefits determined at the time of hire in accordance with Department of State Standardized Regulation (DSSR) and DoDI 1400.25 volume 1250.
- For positions in a foreign country, that country's laws or international agreements may have a direct impact on the ability of an employee's same sex domestic partner or spouse to accompany the employee and receive certain benefits. If you believe you may be affected by these laws and agreements, you should familiarize yourself with relevant information and direct questions concerning a specific country (Foreign Duty Location) to the appropriate Army Human Resources point of contact prior to the acceptance of employment and your entrance on duty.
- The initial length of this overseas tour is 36 months.
- Multiple positions may be filled from this announcement.
- When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
- Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
You may claim Military Spouse preference.
Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.
You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
- Benefits
A career with the U.S. government...
