Forklift Mechanic

GENERAL / DEFINITION:

Is responsible for troubleshooting problems with the forklifts, completing regular inspections, cleaning, and performing general maintenance with an emphasis on preventive maintenance. It is the mechanic’s responsibility to clearly tag the forklift out of service if it is not in safe working order. Must treat people with respect, work ethically, and with integrity, accept responsibility for own actions, and uphold the organization's vision, values, and objectives. Must work well with coworkers.

ESSENTIAL FUNCTIONS:

1. Perform and document regular preventive maintenance on equipment and forklifts

2. Perform oil changes, grease and lubricate forklift parts (e.g. boom, cirt fittings)

3. Steam/pressure wash the forklift

4. Touch up paint forklift when needed

5. Will do tire changes

6. Maintain proper transmission oil level and battery water level etc.

7. Check battery terminals for corrosion

8. Some fabricating parts will be needed

9. Will complete overall inspections of the forklift systems. For example, the mechanic will check:

a. Levels of fluids

b. For leaks

c. General engine condition

d. Muffler

e. Air cleaner

f. Clutch

g. Steering

h. Bushings

i. Filter systems

j. Hydraulics

k. Brakes

l. Cooling system

m. All safety items

1. Will need to be forklift certified

2. Should have a strong background in welding, hydraulics, and pneumatics

3. Will need to supply some own tools, e.g. wrenches, pry bar, screwdrivers, electrical gauge, ½ ratchet set with sockets, impact gun, channel locks, vise grips, pliers, wire strippers etc.

4. Must have the ability to exercise and demonstrate safety skills

5. Should have the ability to work with minimal supervision

6. Able to speak Spanish and English is preferable/helpful

7. Should have 2-3 years experience as a Forklift Mechanic and knowledge of forklift operation

8. Must have a good mechanical background with some knowledge of hydraulic systems, LP systems, and electrical wiring

Physical:

1. Must be able to lift and carry up to 70 pounds

2. Must be able to identify malfunctions (worn or rattling parts)

3. Must be able to apply torque, bend, twist, kneel, sit, stand, lay on the ground, etc. throughout the shift

4. Working outside in a covered area

Safety:

1. Must wear safety glasses and steel-toed shoes at all times

2. Wear a helmet, ear plugs, back brace, and gloves when necessary

3. Know all safety procedures for each machine, tool, and chemical used

4. Attend all safety training (and the once-a-month meetings)

5. Must address safety issues at the station immediately to the supervisor

6. Must report accidents and injuries within 24 hours to management

7. Must follow all safety requirements and training at all times