Address
Form of workJob ID: 487741
Safety, Integrity, Quality are the foundation or core values on which Tilcon New York Inc., a CRH company operates. Located in New York and New Jersey, Tilcon New York Inc. is an integrated materials company with multiple quarry locations, water terminals, heavy highway construction division, asphalt and recycle plants. Tilcon manufactures sells and ships, made in the USA, products of crushed stone, asphalt, sand, gravel and recycled materials throughout New York, New Jersey, and some areas of Pennsylvania. Growth opportunity, professional development and a culture of support and resources are provided to each employee for their personal growth and success within Tilcon New York Inc., and CRH.
Position Overview
Will work in all areas of Operations (Quarry, Asphalt, and Recycle) where there are large amounts of MCC's (Motor Control Centers), Three Phase Motors, and PLC (Programmable Logic Centers). Responsible for the maintenance, troubleshoot and repair of plant in a safe and timely manner to maximize plant productivity. Will be required to be available to travel to all New Jersey site locations (depending on your assigned location), respond to unexpected emergency requests and work multiple shifts and/or overtime.
Roles & Responsibilities
(Essential Duties and Functions)
- Inspect work area and complete Work Area Inspection forms daily.
- Troubleshoot, repair and maintain electrical distribution systems including electric motors and electric controls.
- Run conduit and wires.
- Change motors, starters, relays, etc.
- Maintain appropriate service and repair records.
- Respond to routine and emergency calls for repairs and service.
- Perform housekeeping as deemed appropriate by Foreperson and/or Manager.
- May be called upon at discretion of the Foreperson and/or Manager to perform any other duties assigned and to assist other departments as necessary.
- Maintain and demonstrate a clear understanding of OMG and Tilcon's values - Safety, Integrity & Quality.
- Demonstrate the ability to perform all duties safely.
- Wears a hardhat, safety glasses, steel-toed footwear, gloves, hearing protection and respirator as needed.
- Learn and implement MSHA standards and regulations to insure a safe operating environment is maintained at all times.
- Report any safety concerns to the foreperson immediately.
- Needs to be familiar with NEC (National Electrical Code) and the NFPA 70 E
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Education/Experience
- High School or GED
Work Requirements
- Knowledge of electrical theory and methods, materials, tools, equipment and systems used in the electrical trade.
- Basic mechanical skills needed.
- Knowledge of single and three phase motors.
- Must be capable of working with voltages from millivolts to 600 volts single and three phases.
- Must be able to understand and interpret electrical drawings and blueprints.
- Must possess the ability to properly splice and install wires.
- Must be able to operate manlift and work from occasional heights.
- Must be able to use volt meters, continuity meters and megger meters.
- Must be able to identify areas of containment.
Knowledge/Skill Requirements
- Able to perform all duties without a direct threat of injury to the individual or others.
- Ability to operate assigned equipment safely and efficiently.
- Demonstrates safe, productive job performance.
- Ability to work with minimal direction and initiate problem-solving skills.
- Ability to meet deadlines and perform under pressure.
- Ability to communicate effectively with and work well with other personnel.
- Ability to carry out simple oral and written instructions and deal with simple problems.
- Ability to read English or Spanish.
Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Frequently
- Bend
- Kneel
- Squat
- Climb (Ladder or Stairs)
- Stand
- Walk
- Reach
- Fine motor
Occasionally
- Sit
- Drive
- Repetitive Motion
- Right
- Left
The employee must occasionally lift and/or move:
Frequently
- 0 - 10 lbs
- 10 - 25 lbs
- 25 - 50 lbs.
Occasionally
- 50 - 100 lbs.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud.
Continuous
- Exposed to noise
- Moving Equipment
- Work with others
Frequently
- Hot weather
- Cold weather
- Wet weather
Occasionally
- Exposed to high heat
What CRH Offers You
- Highly competitive base pay
- Comprehensive medical, dental and disability benefits programs
- Group retirement savings program
- Health and wellness programs
- A culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.
If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
Tilcon New York Inc., a CRH Company, is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
Date: Dec 10, 2023
