Address
Form of workAbout the Position: This position is with the US Army Corps of Engineers (USACE), Institute for Water Resources (IWR), Risk Management Center (RMC).
Current permanent Army employee: this position will be filled from employees eligible for temporary promotion, temporary reassignment, or temporary change to lower grade. This position may be converted to permanent without further competition.Qualifications: Additional About the Position:
Current Army Employees: The position is temporary not to exceed one (1) year with provisions to extend in increments of up to one (1) year for a total of (5) years. This position may be converted to permanent without further competition for current Army employees.
If you are any of the other eligibilities: This position is TERM not to exceed 13 months, with provisions to extend up to a maximum of eight years.
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic requirements:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
To qualify based on your experience, your resume must describe at least one year of specialized experience, at the next lower grade (GS-13), which includes: Proficiency in engineering principles related to the analysis and evaluation of dams and other water resources structures; communicating complex technical principles clearly and effectively; providing recommendations for improvements for dam and water resources structures based on engineering and construction processes and regulations; providing specifications on resource allocation of project development and time estimates; coordinating with other agencies/organizations to develop strategic partnerships that promote the advancement of dame and levee safety missions.
You will be evaluated on the basis of your level of competency in the following areas:
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).Education: FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
Completion of education requirements must be completed from the closing date of this announcement.Employment Type: FULL_TIME
Current permanent Army employee: this position will be filled from employees eligible for temporary promotion, temporary reassignment, or temporary change to lower grade. This position may be converted to permanent without further competition.Qualifications: Additional About the Position:
Current Army Employees: The position is temporary not to exceed one (1) year with provisions to extend in increments of up to one (1) year for a total of (5) years. This position may be converted to permanent without further competition for current Army employees.
If you are any of the other eligibilities: This position is TERM not to exceed 13 months, with provisions to extend up to a maximum of eight years.
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities
- 30 Percent or More Disabled Veterans
- Current Department of Army Civilian Employees
- Interagency Career Transition Assistance Plan
- Military Spouses, under Executive Order (E.O.) 13473
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic requirements:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
To qualify based on your experience, your resume must describe at least one year of specialized experience, at the next lower grade (GS-13), which includes: Proficiency in engineering principles related to the analysis and evaluation of dams and other water resources structures; communicating complex technical principles clearly and effectively; providing recommendations for improvements for dam and water resources structures based on engineering and construction processes and regulations; providing specifications on resource allocation of project development and time estimates; coordinating with other agencies/organizations to develop strategic partnerships that promote the advancement of dame and levee safety missions.
You will be evaluated on the basis of your level of competency in the following areas:
- Civil Engineering
- Leadership
- Project Management
- Risk Management
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).Education: FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
Completion of education requirements must be completed from the closing date of this announcement.Employment Type: FULL_TIME
