Welder & Construction Opportunities - Gas Operations

JOB SUMMARY:

                Responsible for making welds that will comply with applicable code(s), and for accurate fabrication of piping configurations.

ESSENTIAL JOB FUNCTIONS:                                                                                 

• Provide operable welding machine, truck and hand tools.                            
• Provide sound welds which will pass non-destructive testing  (X-ray) standards of applicable welding code(s).                  
• Cut pipe segments to proper length and install weld fittings to proper orientation to facilitate accurate fabrication.   
• Perform other tasks assigned by supervisor(s) which may not involve

                              welding/cutting on pipe systems.  For example, repairs to machinery,

                               equipment, or fabrication of structural items.           

REQUIRED QUALIFICATION:

Knowledge/Skill/Ability

-               Ability to accurately fabricate piping configurations.

-               Ability to work from spool sheets, isometric drawings, or blueprints.

-               Ability to make sound weld elements which will pass X-ray examination per applicable code(s).

-               Ability to perform mathematical calculations related to the work (addition, subtraction,

                multiplication, and division).

-               Pass qualification test(s) per customer requirements as well as any applicable Government (State)  tests or be in possession of qualification papers that are acceptable to the Customer.

Education/Experience:

-               Completion of high school is preferred.

-               Some reading is required to work from drawings or spool sheets.

-               Should be able to add, subtract, multiply, and/or divide to facilitate accurate dimensioning for

                for fabricated assemblies.                 

PHYSICAL REQUIREMENTS:                                                                                                  

Walking/balancing and moving about on foot to perform work on rough terrain or physical impediments such as mud, ice, sand,or snow.

Stooping, crouching, bending, kneeling, or assuming other body postures to make welds/cuts.

Reaching overhead to make welds.

Talking, expressing and exchanging ideas through verbal

Communication as in communicating with personnel at the job

site where equipment and construction noises are present and talking

at high volume is required.

Either seeing, naturally or corrected, so as to observe blueprints, sketches, or other drawings as well as to make sound welds.

Hearing and perceiving the nature, intent and meaning of sounds including instructions, warnings and other verbal communication

at job sites where construction and heavy equipment noise are present.

Physical flexibility to allow changing of work position(s) with no significant passage of time. (20 seconds or less)     

Carrying or transporting objects, for example, boxes of welding rods or gas cylinders, usually by holding or controlling the weight with the

hands or arms and/or shoulders.Grasping as in holding or grasping tools, controls, materials and

other objects in performing essential welding functions at the job site.      

Lifting or raising objects up to 50 lbs. from a lower to a higher

elevation, including equipment, materials and/or tools at a job site.            

                Capable of performing heavy work (exerting up to 100 lbs. of force up

                                to 1/3 of the time, and/or up to 50 lbs. of force up to 2/3 of the time,

                                and/or up to 20 lbs. of force more than 2/3 of the time to move objects.)  

                Climbing, ascending or descending ladders, scaffolds, or similar

                                devices, using feet and legs and/or hands or arms, to reach higher

                                levels of elevation at construction or job sites, often carrying tools

                                or materials.                                                                                                            

                Balancing, as in maintaining equilibrium while working from heights

                                with the welding hood in the down position.                                                    

.               Eye-hand-foot coordination, as in using hand and/or power tools.              

SPECIAL JOB DIMENSIONS:

 Job involves exposure to weather extremes including heat, cold, wet, wind, or humidity.  Also involves exposure to high noise levels.  The work may or may not be performed under shelter from any of the elements of nature.  Some of the work will be performed in ditches.  The work involves exposure to arc flash from the welding operation.  The job may require working 6 or 7 days per week with 12 hour or longer work days being required.  this type schedule could go on for an extended period of time.

NOTE:   The primary responsibilities and requirements contained in this document describe the general nature and level of the work performed by personnel assigned to the job.  They are not intended to represent an exhaustive listing or be inclusive of all aspects of the job.  The tasks and procedures involved in the performance of the job responsibilities may vary from day-to-day.  Major changes in areas of responsibility will require revision of this job description.