** CANDIDATES WILL BE REQUIRED TO CREATE A PROFILE AT fluorcraft.com**
Essential Duties and Responsibilities
· Weld Pipes and Steel of various material types and sizes such as Carbon Steel, Stainless (316,304, Hastelloy & AL6XN), Plastic, Copper, Brass of various sizes and weights from ¼” OD to 18” OD
· Read welding symbols on drawings and specifications
· Weld in a fabrication shop, outside or inside an operation facility
· Perform quality welds that meet project standards using various types of Welding procedures such as GTAW, Orbital, SMAW, Soldering and Brazing.
· Inspect worksite to determine presence of obstructions to determine best and safest location for field welds.
· Determine the required tools & materials to efficiently and safely execute the assignment
· Perform welding machine/equipment set up & operation. Proper selection and use of filler material
· Plan sequence of installation to allow for weld inspections, avoid obstructions and other construction or operation activities.
· Draft/draw ISOs and Maintain a daily weld log
· Inspecting materials, tools and equipment
· Inspect final welds for consistency, imperfections or defects
· Layout, field route, fabrication, assemble and install new Utilities and Process piping systems according to job specifications
· Repair, modify or alter existing Utilities and Process piping systems
· Perform hydrostatic or pneumatic tests on new and existing piping systems
· Observe and abide by all safety regulations
Preferred 3+ Years’ Experience
· Commercial / industrial process pipe welding experience
· Process and Hygienic Pipe welding using GTAW and Orbital welding procedures
· Utilities Pipe welding using GTAW, SMAW, Soldering and Brazing
· Working in a fully operational manufacturing facility
· Driving/operating Standard Forklift, Forklift Lull, Aerial Boom and Platform Scissor Lift
· Using basic welding machine and equipment with a foot or thumb controller
· Using a AMI or Swagelok Orbital welding machine
· Hygienic welding to a pharmaceutical quality specification
· Passing bend test taken in the 2G and 5G positions
· Using basic shop tools of the trade: Thread Machine, Drill press, Table Bandsaw, Orbital saw, Metal Break, Metal Shear, Plasma Arc, Oxygen/Acetylene Torch
· Using basic hand and power tools of the trade: Grinder, Port-A-Band, ProPress Crimping tool, Facing tool, Tubing benders, Pipe Wrenches, Pipe Pliers, Wrenches, Ratch/Socket wrenches, Centering Head, Pipe Wrap, Pipe Clamp, Fitter Grips, Flange Aligner, Radius Markers, Welder’s Gauge, Flange Spreader, Hack Saw, Allen Wrenches, Spacing Wedges, Two-Hole Pins, Miter Marker, Tape Measure, Protractor, Pipe Fitter’s Square, Framing Square, Screwdrivers, Calculator, Laser Level.
· Assembling and installing variety of metal, nonmetal pipe, fittings such as Carbon Steel, Stainless, Plastic, Copper, Brass of various sizes and weights from ¼” OD to 18” OD
· Instrumentation fitting using SS, Plastic (Poly) and copper tubing
· Reading and interpreting all standard construction drawings: Blueprints, P&IDs, Schematics, Isometrics,3D Model, Welding symbols drawings and specifications etc...
Basic Job Qualification Requirements:
· Able to work minimum 40+ plus hours per week
· Self-motivated individual with a cooperative attitude a must
· Ability to work with minimum or direct supervision
· Ability to perform quality welds in different positions, locations heights and environments.
· Possess basic math skills
· Read and interpret all standard construction drawings
· Knowledge of the different types of welding procedures, equipment and materials
· Knowledge of pipe fabrication methods, equipment and power tools
· Follow oral and written directions, plans, and blueprints
· Draft/draw ISOs and Maintain a daily weld log
· Must have Pipe Welder hand tools, which include but not limited to: Hardhat compatible welding hood, Full Leather Welding Jacket, Small MAG Flashlight, Inspection mirrors of various sizes and lengths, Pipe Wrenches, Pipe Pliers, Combination Wrenches( Standard and Metric), Ratch/Socket set (Standard and Metric) , Centering Head, Pipe Wrap, Pipe Clamp, Fitter Grips, Flange Aligner, Radius Markers, Welder’s Gauge, Flange Spreader, Hack Saw, Allen Wrenches, Spacing Wedges, Two-Hole Pins, Miter Marker, Tape Measure, Protractor, Pipe Fitter’s Square, Framing Square, Screwdrivers, Calculator, Laser Level
Physical Requirements
· Work 12hr+ Shifts for a 40hr+ week
· Work at elevated heights using Ladders, Scaffolding, Aerial Lifts
· Able to lift up to 40 lbs frequently throughout the shift
· Able to stand and work for prolonged periods of time
· Must possess enough strength and stamina to perform the basic and essential functions as identified above
· Must be able to move in and around confided spaces and uneven areas
· Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises
· Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces
· Must be able to work wearing Hardhat, Safety glasses, Safety/Steel toe boots, High visibility vest and Fall arrest harness equipment
· Abel to work inside or outside with various temperature and weather conditions and where noise levels are at or above 85 decibels
· EDUCATION:
· Minimum of a high school education or equivalent
Job Type: Full-time
Pay: $29.60 per hour
Benefits:
- 401(k)
- 401(k) matching
- Dental insurance
- Employee discount
- Flexible spending account
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Vision insurance
Experience level:
- 3 years
Shift:
- 10 hour shift
- Day shift
People with a criminal record are encouraged to apply
Experience:
- Pipe Welding: 3 years (Required)
Work Location: In person