Address
Form of workSummary
You will serve as a NAVAL ARCHITECT in the HULL ENGINEERING DIVISION of SUPERVISOR OF SHIPBUILDING BATH.
Salary Range by Location and Grade Level:
Bath, ME
GS-07: $52,527 - $68,285
GS-09: $64,251 - $83,523
Marinette, WI / Sturgeon Bay, WI / Mayport, FL
GS-07: $46,696 - $60,703
GS-09: $57,118 - $74,250
San Diego, CA
GS-07: $52,912 - $68,785
GS-09: $64,722 - $84,135
This job is open to
Clarification from the agency
Current permanent employees, DoD Military Spouse Preference (MSP) eligibles, DoD Military Reserve (MR) and National Guard (NG) Technician Preference eligibles and DoD Retained Grade Preference eligibles, and VEOA eligibles.
Duties
Requirements
Conditions of Employment
Qualifications
FOR GS-09 Grade Level:
Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-07) or pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer performing architectural engineering analysis of project requirements or specifications to support the design, construction, or test and post-delivery of naval surface ships.
FOR GS-07 Grade Level:
Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-05) or pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer applying NAVAL ARCHITECTural concepts, principles, methods, or practices to assist in the design, construction, or test and post-delivery activities for naval surface ships.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=Group-Standards
AND
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following Basic Education Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In lieu of specialized experience, you may qualify with the following education or combination of both education and experience:
FOR GS-09 Grade Level:
FOR GS-07 Grade Level:
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) MAY be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive MAY be authorized.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.
Applicants selected and hired on this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.
If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/
Military Spouse Preference: applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demons...
You will serve as a NAVAL ARCHITECT in the HULL ENGINEERING DIVISION of SUPERVISOR OF SHIPBUILDING BATH.
Salary Range by Location and Grade Level:
Bath, ME
GS-07: $52,527 - $68,285
GS-09: $64,251 - $83,523
Marinette, WI / Sturgeon Bay, WI / Mayport, FL
GS-07: $46,696 - $60,703
GS-09: $57,118 - $74,250
San Diego, CA
GS-07: $52,912 - $68,785
GS-09: $64,722 - $84,135
This job is open to
- Career transition (CTAP, ICTAP, RPL)
Federal employees who meet the definition of a "surplus" or "displaced" employee. - Federal employees - Competitive service
Current or former competitive service federal employees. - Land & base management
Certain current or former term or temporary federal employees of a land or base management agency. - Military spouses
- Special authorities
Individuals eligible under a special authority not listed above, but defined in the federal hiring regulations. - Veterans
Clarification from the agency
Current permanent employees, DoD Military Spouse Preference (MSP) eligibles, DoD Military Reserve (MR) and National Guard (NG) Technician Preference eligibles and DoD Retained Grade Preference eligibles, and VEOA eligibles.
Duties
- You will be responsible for the resolution of technical issues under the cognizance of the SUPSHIP Bath Waterfront Chief Engineer.
- You will review and approve complex engineering data prepared by the shipbuilder, government design agent, or their subcontractors to assure compliance with the design specification, sound structural engineering and NAVAL ARCHITECTure practice.
- You will conduct technical evaluations and investigations into project and process problems which arise during the design, construction and overhaul of naval ships.
- You will prepare correspondence, technical and trip reports, memoranda, specification change notices, work instructions, contract field modification requests, and scope documents as required to complete project assignments.
- You will review and evaluate changes to the shipbuilding or ship repair specifications to determine the impact of such changes on the system design, operation, construction schedule and cost.
- You will coordinate with other engineers in design development and ship construction to ensure that all technical areas are covered.
- You will provide technical support to Quality Assurance Specialists and Managers within the Quality Assurance Directorate, as required.
- You will identify and resolve problems that may arise during in-process inspection, test and trials.
Requirements
Conditions of Employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This is a bargaining unit position.
Qualifications
FOR GS-09 Grade Level:
Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-07) or pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer performing architectural engineering analysis of project requirements or specifications to support the design, construction, or test and post-delivery of naval surface ships.
FOR GS-07 Grade Level:
Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-05) or pay band in the Federal service or equivalent experience in the private or public sector as a professional engineer applying NAVAL ARCHITECTural concepts, principles, methods, or practices to assist in the design, construction, or test and post-delivery activities for naval surface ships.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=Group-Standards
AND
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following Basic Education Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In lieu of specialized experience, you may qualify with the following education or combination of both education and experience:
FOR GS-09 Grade Level:
- Successful completion of a master's or equivalent graduate degree; -OR-
- Successful completion of two full years of progressively higher graduate level education leading to a master's degree; -OR-
- A combination of experience and education as described above that equates to one year of experience.
FOR GS-07 Grade Level:
- Successful completion of one full year of graduate level education; -OR-
- Successful completion of a bachelor's degree with superior academic achievement; OR-
- A combination of experience and education as described above that equates to one year of experience.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) MAY be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive MAY be authorized.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.
Applicants selected and hired on this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.
If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/
Military Spouse Preference: applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
- Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demons...
