Address
Form of workJob Description
I&C ENGINEER
Location: Hybrid/Houston, TX
Duration: 4 Month plus contract to Perm hire
Hybrid: We are open to employees working remote (from home) as long as they can be at the Houston office or Port Arthur project sites as required.
Specific Responsibilities:
The successful candidate will have the following specific responsibilities:
• Develop I&C deliverables for all phases of a project, including conceptual design, preliminary design and detailed design, to ensure that applicable codes, standards, and procedures are followed, and quality is acceptable. Monitors productivity and technical proficiency of assigned instrumentation and controls personnel to support the project.
• Define scope of work, design criteria, schedule, standards, and procedures for project assignments; which may include Process Control Systems, SCADA Systems, Motor Control Systems and wiring, Controllers and I/O cabinets, as well as other automated systems.
• Develop I&C engineering and design effort man-hour estimates, control cabinet material and labor estimates, instrumentation material and labor construction cost estimates.
• Provide technical direction for I&C projects, makes decisions and/or obtains additional technical staff assistance as the situation warrants, as well as directly interfaces with customers.
• Ensure that discipline design work is coordinated with project staff and Engineers from other disciplines by maintaining clear and frequent communications.
• Advise engineering and project management regarding any problem areas, staffing requirements, delays in production, scope changes, or other events which could affect project completion and/or profitability.
• Recommend design methods, installation methods, equipment use, etc., for discipline standards.
• Produce project drawings and design calculations.
• Develop and/or review the design of Process Control and SCADA Systems.
• Develop and/or review the procurement activities associated with I&C Systems, equipment, and field devices. Procurement activities include preparing technical data for inquiry packages, preparing technical bid evaluations, vendor submittal reviews, factory acceptance testing, and commissioning protocol preparation.
• Develop and/or review typical I&C engineering and design drawings such as P&IDs, Instrument Loop Sheets, Interconnecting Instrument Wiring Diagrams, Motor Control Elementary Wiring Diagrams, Process Control System Network Architecture Diagrams, Process Control System Controller and I/O Cabinet Layout drawings and Bills of Material.
• Develop and/or review typical I&C specifications for Process Control System hardware, software, and applications specifications including Functional Specifications, Control Strategy Narratives/Logic Diagrams, and SCADA HMI designs.
• Perform I&C construction administration activities such as contractor submittals review, responses to requests for information (RFI), site reviews and inspections.
• Participate and assist the customer and construction team in start-up, testing and commissioning tasks.
• Participate in the development of I&C construction bid packages.
• Perform inspections of I&C installations for conformance with engineering documents, equipment specifications, and safety standards.
• Develop standard operating procedures (SOP) for I&C devices and equipment on mission critical facilities.
Qualifications:
The successful candidate will possess the following qualifications:
• Located in Houston, Texas for frequent visits to client office and project sites.
• US citizenship is required.
• 12+ years of I&C engineering and design experience specific to water, wastewater, chemical plant, oil & gas and other related industrial projects.
• Bachelor's Degree in a related engineering discipline is required.
• Current, active Professional Engineer (PE) license is preferred and/or willingness and ability to obtain a PE license within 12 months of hire.
• Proven Leadership experience is required.
• Thorough knowledge of I&C engineering and design practices including drawings, specifications, codes, and construction techniques.
• Working knowledge of applicable Industry Codes and Standards (e.g. NEC, ASME, ANSI, ISA, ASHRAE, IEEE, ASTM, NFPA).
• Experience in the application of I&C devices in electrically classified hazardous areas through intrinsic safety, explosion proof, and purged enclosure techniques.
• Experience in DCS and PLC based control systems and SCADA Systems design as well as associated control communication networks design experience.
• Experience with instrumentation field bus technologies such as: Ethernet, Foundation Fieldbus, Profibus, Devicenet, and ASI bus.
• Ability to work both independently and as a member of a team of engineers and designers on multiple, concurrently executed projects.
• Good organizational and communication skills. Expresses ideas concisely and clearly, both orally and in writing.
• Accepts responsibility for own actions and honors commitments.
• Willingness and ability to travel to client offices, other Parsons offices, and project sites for meetings, performing inspections and walk downs, and to assist field personnel and construction team with I&C technical issues.
• Proficient in the use of office personal computers, office networks, and the Microsoft Office suite of software (Word, Excel, PowerPoint, Access)
ESPO Corporation
www.espocorp.com
View all open jobs at www.espocorp.com/jobs
Leaders in Technical Recruiting & Staffing since 1965
We are an Equal Opportunity Employer and value the benefits of diversity in our workforce . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity and expression, national origin, disability, protected Veteran status, or any other attribute or protected characteristic by law. If you need assistance applying please contact us directly.
Location: Hybrid/Houston, TX
Duration: 4 Month plus contract to Perm hire
Hybrid: We are open to employees working remote (from home) as long as they can be at the Houston office or Port Arthur project sites as required.
Specific Responsibilities:
The successful candidate will have the following specific responsibilities:
• Develop I&C deliverables for all phases of a project, including conceptual design, preliminary design and detailed design, to ensure that applicable codes, standards, and procedures are followed, and quality is acceptable. Monitors productivity and technical proficiency of assigned instrumentation and controls personnel to support the project.
• Define scope of work, design criteria, schedule, standards, and procedures for project assignments; which may include Process Control Systems, SCADA Systems, Motor Control Systems and wiring, Controllers and I/O cabinets, as well as other automated systems.
• Develop I&C engineering and design effort man-hour estimates, control cabinet material and labor estimates, instrumentation material and labor construction cost estimates.
• Provide technical direction for I&C projects, makes decisions and/or obtains additional technical staff assistance as the situation warrants, as well as directly interfaces with customers.
• Ensure that discipline design work is coordinated with project staff and Engineers from other disciplines by maintaining clear and frequent communications.
• Advise engineering and project management regarding any problem areas, staffing requirements, delays in production, scope changes, or other events which could affect project completion and/or profitability.
• Recommend design methods, installation methods, equipment use, etc., for discipline standards.
• Produce project drawings and design calculations.
• Develop and/or review the design of Process Control and SCADA Systems.
• Develop and/or review the procurement activities associated with I&C Systems, equipment, and field devices. Procurement activities include preparing technical data for inquiry packages, preparing technical bid evaluations, vendor submittal reviews, factory acceptance testing, and commissioning protocol preparation.
• Develop and/or review typical I&C engineering and design drawings such as P&IDs, Instrument Loop Sheets, Interconnecting Instrument Wiring Diagrams, Motor Control Elementary Wiring Diagrams, Process Control System Network Architecture Diagrams, Process Control System Controller and I/O Cabinet Layout drawings and Bills of Material.
• Develop and/or review typical I&C specifications for Process Control System hardware, software, and applications specifications including Functional Specifications, Control Strategy Narratives/Logic Diagrams, and SCADA HMI designs.
• Perform I&C construction administration activities such as contractor submittals review, responses to requests for information (RFI), site reviews and inspections.
• Participate and assist the customer and construction team in start-up, testing and commissioning tasks.
• Participate in the development of I&C construction bid packages.
• Perform inspections of I&C installations for conformance with engineering documents, equipment specifications, and safety standards.
• Develop standard operating procedures (SOP) for I&C devices and equipment on mission critical facilities.
Qualifications:
The successful candidate will possess the following qualifications:
• Located in Houston, Texas for frequent visits to client office and project sites.
• US citizenship is required.
• 12+ years of I&C engineering and design experience specific to water, wastewater, chemical plant, oil & gas and other related industrial projects.
• Bachelor's Degree in a related engineering discipline is required.
• Current, active Professional Engineer (PE) license is preferred and/or willingness and ability to obtain a PE license within 12 months of hire.
• Proven Leadership experience is required.
• Thorough knowledge of I&C engineering and design practices including drawings, specifications, codes, and construction techniques.
• Working knowledge of applicable Industry Codes and Standards (e.g. NEC, ASME, ANSI, ISA, ASHRAE, IEEE, ASTM, NFPA).
• Experience in the application of I&C devices in electrically classified hazardous areas through intrinsic safety, explosion proof, and purged enclosure techniques.
• Experience in DCS and PLC based control systems and SCADA Systems design as well as associated control communication networks design experience.
• Experience with instrumentation field bus technologies such as: Ethernet, Foundation Fieldbus, Profibus, Devicenet, and ASI bus.
• Ability to work both independently and as a member of a team of engineers and designers on multiple, concurrently executed projects.
• Good organizational and communication skills. Expresses ideas concisely and clearly, both orally and in writing.
• Accepts responsibility for own actions and honors commitments.
• Willingness and ability to travel to client offices, other Parsons offices, and project sites for meetings, performing inspections and walk downs, and to assist field personnel and construction team with I&C technical issues.
• Proficient in the use of office personal computers, office networks, and the Microsoft Office suite of software (Word, Excel, PowerPoint, Access)
ESPO Corporation
www.espocorp.com
View all open jobs at www.espocorp.com/jobs
Leaders in Technical Recruiting & Staffing since 1965
We are an Equal Opportunity Employer and value the benefits of diversity in our workforce . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity and expression, national origin, disability, protected Veteran status, or any other attribute or protected characteristic by law. If you need assistance applying please contact us directly.
