Fiberglass Laminator

Company	Energy Jobline LtdSee more
Address	Orlando, FL
Form of work	Full time

Job description

Pacesetter Personnel is hiring Fiberglass Technicians and Assemblers in Orlando Florida.

We have a 2 year project that is looking for workers who can do the following.

Job Description

* Release air bubbles and smooth seams, using rollers.
* Spray chopped fiberglass, resins, and catalysts onto prepared molds or dies using pneumatic spray guns with chopper attachments.
* Place materials into molds.
* Select precut fiberglass mats, cloth, and wood-bracing materials as required by projects being assembled.
* Select production input materials.
* Pat or press layers of saturated mat or cloth into place on molds, using brushes or hands, and smooth out wrinkles and air bubbles with hands or squeegees.
* Place materials into molds.
* Mix catalysts into resins, and saturate cloth and mats with mixtures, using brushes.
* Mix substances to create chemical solutions.
* Apply water or solutions to fabrics or apparel.
* Apply layers of plastic resin to mold surfaces prior to placement of fiberglass mats, repeating layers until products have the desired thicknesses and plastics have jelled.
* Apply parting agents or other solutions to molds.
* Check completed products for conformance to specifications and for defects by measuring with rulers or micrometers, by checking them visually, or by tapping them to detect bubbles or dead spots.
* Measure dimensions of completed products or workpieces to verify conformance to specifications.
* Mask off mold areas not to be laminated, using cellophane, wax paper, masking tape, or special sprays containing mold-release substances.
* Apply lacquers and waxes to mold surfaces to facilitate assembly and removal of laminated parts.
* Apply parting agents or other solutions to molds.
* Check all dyes, templates, and cutout patterns to be used in the manufacturing process to ensure that they conform to dimensional data, photographs, blueprints, samples, or customer specifications.
* Inspect production equipment.
* Inspect, clean, and assemble molds before beginning work.
* Inspect production equipment.
* Clean production equipment.
* Build production molds.
* Trim excess materials from molds, using hand shears or trimming knives.
* Trim excess material from workpieces.
* Repair or modify damaged or defective glass-fiber parts, checking thicknesses, densities, and contours to ensure a close fit after repair.
* Repair parts or assemblies.
* Cure materials by letting them set at room temperature, placing them under heat lamps, or baking them in ovens.
* Trim cured materials by sawing them with diamond-impregnated cutoff wheels.
* Trim excess material from workpieces.