Address
Form of workJob Description
Description
Construction Manager Accountable for all Civil Works and associated financial control via Scheduling (time), SP/ASP and Quality Management on a given project.
- Ensure that all Service Providers are adhering to Ericsson standards, processes and procedures as well as all Federal and Local standards. Identifies continuous improvement opportunities. Interfaces with External Interfaces: ASP/SP, Customer PM Internal Interfaces: IM Lead, Project Admin, Project Sponsor, - CPM Responsibilities Include
• Assess and control charges to the agreed site design
• Assures that:
o Only Customer’s approved materials are installed on the project
o The agreed Civil Works guidelines and schedules are followed and enforced.
• Attend coordination and progress meetings
• Awareness and on-site supervision during where risk of disturbances in customer site performance is high.
• Check that the working environment is maintained at an acceptable level, carry out safety inspections and ensure that tools, etc. are in good working condition.
• Civil Works problem solving as required during the project.
• Coordinates site activities and assures that all disciplines directly involved in the project are in phase with the Project goals and objectives.
• Drive schedule activities and trouble-shooting results.
• Ensure that:
o Service Providers and vendors/suppliers meet all the technical specifications with respect to E/// and customer specifications.
o Workmanship quality of the installations done by the Service Providers is within the Contract, Ericsson standards and Customer expectations.
o All Ericsson, Federal, Local, and customer safety guidelines and construction procedures are enforced during the entire Civil Works phase of the project.
• Knowledge in workers safety and work environment safety.
• Perform:
o Site pre-inspections and coordinate post-construction audits.
o Site verification.
o Visual inspection of quality on site.
• Prepares regular interval progress reports as required by the project
• Provide accurate status information on the progress to project management.
• Provide technical assistance to the Service Providers and any other suppliers that provide services associated with the Civil Works activities.
• Reject wrong deliveries of material to site.
• Report bad performance and quality on site.
• Responsible for the proper interpretation and compliance of the civil design plans.
• Supervise, coordinate and monitor works with the Service Providers and other disciplines that have an interface with the Civil Works part of the project.
• Team leadership focusing on quality and results.
• Write claims, order and return materials.
• Maintain and update construction-specific areas of Site Handler including but not limited to the following:
o SOW and preconstruction documents (NTP, SOW, RFDS, safety guidance, QA standards, etc)
o NTP receipt verification
o RFDS submission review and changes
o Civils acceptance documents, submission receipt, review and approval
o Civils progress PFA verification (daily)
o Close out document review and acceptance sign off
Construction Manager 2 – CM2 Has GOOD knowledge and skills.
IDENTIFIES and SOLVES complicated problems that require careful analysis by ADAPTING existing procedures, techniques and methods. ACTIVELY CONTRIBUTES to improvement and change. Works INDEPENDENTLY. Experience/Qualification Level Minimum of 3-5 years of experience:
o Job-related experience with project builds over 200 sites Reports to CM3 (Lead) or IM Lead.
JOB SUMMARY
The Scoping Engineer is responsible for identifying all technical aspects of the telecommunications equipment to be scoped for a deployment at assigned job/sites and is the decision maker on all issues falling under the position’s scope. The Scoping Engineer is responsible for ensuring the appropriateness of the site for deployment, reviewing construction drawings, installation documents and customer requirements and identifying all work types and work packages. The Scoping Engineer is responsible for creating and documenting the Scope of Work (SOW) and the Bill of Material (BOM) that will be provided to Ericsson stakeholders to be used as the basis for site the build plan and materials procurement. This will be accomplished via site walks, desk top documentation review and review of aerial imagery. The SOW will be created by the Scoping Engineer using the appropriate Ericsson tools for approval and communication to other stakeholders.
JOB RESPONSIBILITIES
Develop and document a comprehensive per site SOW and BOM which will include identification of all work types and drivers. Support various delivery organizations with construction technical expertise.
1. Understanding the site technical solution, construction standards and SOW contracted by the customer, including work packages, material requirements and final deliverables to customer
2.. Understanding Cell Site Construction Drawings (CD), Radio Design Frequency Sheet (RFDS), Structural/Mount Design Elements and requirements
3. Utilizing the Scoping Engineer’s expertise of the build elements to:
A. Review RFDS, CD, mount and structural designs for constructability and accuracy using Drone Survey data. Document (redline) discrepancies and return to the document owner for correction.
B. Create the per site SOW and BOM by determining the step-by-step methodology using construction drawings, RFDS and drone survey data
C. Create day by day build/outage plan and review with stakeholders (CMs, SPs and Customer) to ensure alignment
D. Plan and adjust schedules, as necessary, and work with Customer Project Manager, Market CMs and Service Providers on any necessary changes to the scope, including recommendations
E. Review supplier quotes for accuracy and approve or reject as necessary. This may include material, services and rental equipment quotes
F. Identify and document appropriate rigging and crane requirements necessary to perform the work
G. Participate in project planning meetings, providing guidance, as needed, and determining resolutions to any problems or issues raised during plan of day meetings at various phases of the project
5. Preparing various reports, analyses and presentations as necessary, including (but not limited to) status reports on progress and, if any problems, then recommended manner of handling the problem
BEHAVIORAL COMPETENCIES
• Entrepreneurial & commercial thinking
• Ability to perform at a high level with minimal supervision
• Ability to proactively analyze issues and make sound decisions
• Ability to learn and excel using Ericsson ways of working
• Ability to work and communicate effectively with people
• Ability to multi-task in agile environment
• Ability to cope with pressures & setbacks
• Ability to deliver results and meet customer’s and Ericsson’s expectations
• Planning & organization skills
• Strong leadership skills
• Strong consultative skills
• Ability to think in innovative fashion
TYPICAL INTERFACES
Internal:
• Onshore and offshore delivery teams
• Scoping Team
• Sourcing
• Supply Chain
• Environmental Health & Safety (EHS)
• Market Project Team
• Customer Unit (CU)
• Business Operations
External:
• Customer Project Management
• 3rd Party Suppliers
• 3rd Party Service Providers
TOOLS & RESOURCES
• Ericsson Site Rollout (ESR)
• Site Tracker
• Ericsson Intelligent Site Design (EISD)
• Customer databases
• Billy Auto BOM
Good knowledge of:
• Microsoft Office suite of programs (especially Excel, Outlook and WORD)
• Adobe Pro
• Databases
• Ericsson local data management tools
• Close-out Package Checklist and required deliverables
• Virtualization tools
QUALIFICATIONS AND EXPERIENCE
• Bachelor’s degree preferred and/or equivalent work experience of 2-5 years industry experience
• Experience managing delivering cell site construction and technology upgrades
• Experience with providing site design solutions and guidance of order of operations
• Ability to review construction documents, determining site feasibility, as well as site design consulting as needed
• Ensure accuracy of constructions drawings and RFDS meeting scoping requirements
• Direct knowledge of general construction processes & procedures and on-site safety requirements
• Direct knowledge of cell site construction and equipment installation material requirements
• Direct knowledge of cell site structural design and modification requirements
• Direct knowledge of rigging and crane requirements
• Experience in construction scope estimation, managing and directing general contractors, generating bill of materials, etc. (Civils, Ground, L&A, Backhaul, MW)
• Knowledge of and ability to enforce Ericsson quality standards.
• Basic knowledge of troubleshooting practices and techniques, including sweep testing concepts.
• Basic knowledge of contracts (leasing, vendor facing, customer facing)
• Ability to solve common problems effectively, on time and within budget
• Strong ability to learn quickly and multitask in fast paced environment across business units and customers
• Strong ability to communicate and work with multiple professional skill levels effectively
• Drive to follow all safety standards and complete approved OSHA 10-hour course for telecommunications industry. If managing crews, then OSHA 30-hour course must be completed
Construction Manager Accountable for all Civil Works and associated financial control via Scheduling (time), SP/ASP and Quality Management on a given project.
- Ensure that all Service Providers are adhering to Ericsson standards, processes and procedures as well as all Federal and Local standards. Identifies continuous improvement opportunities. Interfaces with External Interfaces: ASP/SP, Customer PM Internal Interfaces: IM Lead, Project Admin, Project Sponsor, - CPM Responsibilities Include
• Assess and control charges to the agreed site design
• Assures that:
o Only Customer’s approved materials are installed on the project
o The agreed Civil Works guidelines and schedules are followed and enforced.
• Attend coordination and progress meetings
• Awareness and on-site supervision during where risk of disturbances in customer site performance is high.
• Check that the working environment is maintained at an acceptable level, carry out safety inspections and ensure that tools, etc. are in good working condition.
• Civil Works problem solving as required during the project.
• Coordinates site activities and assures that all disciplines directly involved in the project are in phase with the Project goals and objectives.
• Drive schedule activities and trouble-shooting results.
• Ensure that:
o Service Providers and vendors/suppliers meet all the technical specifications with respect to E/// and customer specifications.
o Workmanship quality of the installations done by the Service Providers is within the Contract, Ericsson standards and Customer expectations.
o All Ericsson, Federal, Local, and customer safety guidelines and construction procedures are enforced during the entire Civil Works phase of the project.
• Knowledge in workers safety and work environment safety.
• Perform:
o Site pre-inspections and coordinate post-construction audits.
o Site verification.
o Visual inspection of quality on site.
• Prepares regular interval progress reports as required by the project
• Provide accurate status information on the progress to project management.
• Provide technical assistance to the Service Providers and any other suppliers that provide services associated with the Civil Works activities.
• Reject wrong deliveries of material to site.
• Report bad performance and quality on site.
• Responsible for the proper interpretation and compliance of the civil design plans.
• Supervise, coordinate and monitor works with the Service Providers and other disciplines that have an interface with the Civil Works part of the project.
• Team leadership focusing on quality and results.
• Write claims, order and return materials.
• Maintain and update construction-specific areas of Site Handler including but not limited to the following:
o SOW and preconstruction documents (NTP, SOW, RFDS, safety guidance, QA standards, etc)
o NTP receipt verification
o RFDS submission review and changes
o Civils acceptance documents, submission receipt, review and approval
o Civils progress PFA verification (daily)
o Close out document review and acceptance sign off
Construction Manager 2 – CM2 Has GOOD knowledge and skills.
IDENTIFIES and SOLVES complicated problems that require careful analysis by ADAPTING existing procedures, techniques and methods. ACTIVELY CONTRIBUTES to improvement and change. Works INDEPENDENTLY. Experience/Qualification Level Minimum of 3-5 years of experience:
o Job-related experience with project builds over 200 sites Reports to CM3 (Lead) or IM Lead.
JOB SUMMARY
The Scoping Engineer is responsible for identifying all technical aspects of the telecommunications equipment to be scoped for a deployment at assigned job/sites and is the decision maker on all issues falling under the position’s scope. The Scoping Engineer is responsible for ensuring the appropriateness of the site for deployment, reviewing construction drawings, installation documents and customer requirements and identifying all work types and work packages. The Scoping Engineer is responsible for creating and documenting the Scope of Work (SOW) and the Bill of Material (BOM) that will be provided to Ericsson stakeholders to be used as the basis for site the build plan and materials procurement. This will be accomplished via site walks, desk top documentation review and review of aerial imagery. The SOW will be created by the Scoping Engineer using the appropriate Ericsson tools for approval and communication to other stakeholders.
JOB RESPONSIBILITIES
Develop and document a comprehensive per site SOW and BOM which will include identification of all work types and drivers. Support various delivery organizations with construction technical expertise.
1. Understanding the site technical solution, construction standards and SOW contracted by the customer, including work packages, material requirements and final deliverables to customer
2.. Understanding Cell Site Construction Drawings (CD), Radio Design Frequency Sheet (RFDS), Structural/Mount Design Elements and requirements
3. Utilizing the Scoping Engineer’s expertise of the build elements to:
A. Review RFDS, CD, mount and structural designs for constructability and accuracy using Drone Survey data. Document (redline) discrepancies and return to the document owner for correction.
B. Create the per site SOW and BOM by determining the step-by-step methodology using construction drawings, RFDS and drone survey data
C. Create day by day build/outage plan and review with stakeholders (CMs, SPs and Customer) to ensure alignment
D. Plan and adjust schedules, as necessary, and work with Customer Project Manager, Market CMs and Service Providers on any necessary changes to the scope, including recommendations
E. Review supplier quotes for accuracy and approve or reject as necessary. This may include material, services and rental equipment quotes
F. Identify and document appropriate rigging and crane requirements necessary to perform the work
G. Participate in project planning meetings, providing guidance, as needed, and determining resolutions to any problems or issues raised during plan of day meetings at various phases of the project
5. Preparing various reports, analyses and presentations as necessary, including (but not limited to) status reports on progress and, if any problems, then recommended manner of handling the problem
BEHAVIORAL COMPETENCIES
• Entrepreneurial & commercial thinking
• Ability to perform at a high level with minimal supervision
• Ability to proactively analyze issues and make sound decisions
• Ability to learn and excel using Ericsson ways of working
• Ability to work and communicate effectively with people
• Ability to multi-task in agile environment
• Ability to cope with pressures & setbacks
• Ability to deliver results and meet customer’s and Ericsson’s expectations
• Planning & organization skills
• Strong leadership skills
• Strong consultative skills
• Ability to think in innovative fashion
TYPICAL INTERFACES
Internal:
• Onshore and offshore delivery teams
• Scoping Team
• Sourcing
• Supply Chain
• Environmental Health & Safety (EHS)
• Market Project Team
• Customer Unit (CU)
• Business Operations
External:
• Customer Project Management
• 3rd Party Suppliers
• 3rd Party Service Providers
TOOLS & RESOURCES
• Ericsson Site Rollout (ESR)
• Site Tracker
• Ericsson Intelligent Site Design (EISD)
• Customer databases
• Billy Auto BOM
Good knowledge of:
• Microsoft Office suite of programs (especially Excel, Outlook and WORD)
• Adobe Pro
• Databases
• Ericsson local data management tools
• Close-out Package Checklist and required deliverables
• Virtualization tools
QUALIFICATIONS AND EXPERIENCE
• Bachelor’s degree preferred and/or equivalent work experience of 2-5 years industry experience
• Experience managing delivering cell site construction and technology upgrades
• Experience with providing site design solutions and guidance of order of operations
• Ability to review construction documents, determining site feasibility, as well as site design consulting as needed
• Ensure accuracy of constructions drawings and RFDS meeting scoping requirements
• Direct knowledge of general construction processes & procedures and on-site safety requirements
• Direct knowledge of cell site construction and equipment installation material requirements
• Direct knowledge of cell site structural design and modification requirements
• Direct knowledge of rigging and crane requirements
• Experience in construction scope estimation, managing and directing general contractors, generating bill of materials, etc. (Civils, Ground, L&A, Backhaul, MW)
• Knowledge of and ability to enforce Ericsson quality standards.
• Basic knowledge of troubleshooting practices and techniques, including sweep testing concepts.
• Basic knowledge of contracts (leasing, vendor facing, customer facing)
• Ability to solve common problems effectively, on time and within budget
• Strong ability to learn quickly and multitask in fast paced environment across business units and customers
• Strong ability to communicate and work with multiple professional skill levels effectively
• Drive to follow all safety standards and complete approved OSHA 10-hour course for telecommunications industry. If managing crews, then OSHA 30-hour course must be completed
